Skip to content

Add support for Amlogic Meson MMC controller

Carlo Caione linux-amlogic u-boot 1 version New

Get series with b4
b4 am 20160520193443.GA17269@mephisto

Versions newest first

  1. v1 Latest0 of 2 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 2 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] Add support for Amlogic Meson MMC controller
Quoted 6 lines · Robert Gadsdon
Quoted 5 lines · Carlo Caione
Quoted 3 lines · Carlo Caione
Quoted 2 lines · Robert Gadsdon

Applied this on my Odroid C2, and it worked OK when installed on the SDcard, but failed when installed on the eMMC module:

Quoted 6 lines
Quoted 3 lines

Oh, reading this again you meant that you put u-boot directly on the eMMC? Ok then, something is wrong when using the driver with the eMMC.

Yes, I installed it directly on the eMMC, using the micro-sd adapter, and following the same instructions as for the SDcard..

Could you try with this patch?

(quoted diff) +0 -0

b/board/hardkernel/odroid-c2/odroid-c2.c
index 34b9a95..ab78328 100644

board/hardkernel/odroid-c2/odroid-c2.c +0 -0
@@ -80,6 +80,11 @@ U_BOOT_DEVICE(meson_mmc) = {
        .platdata = &gxbb_sd_platdata[CONFIG_MMC_MESON_SD_PORT],

	 };
	  
	  +U_BOOT_DEVICE(meson_emmc) = {
	  +       .name = "meson_mmc",
	  +       .platdata = &gxbb_sd_platdata[2],
	  +};
	  +
	   static void meson_mmc_pinmux_setup(unsigned int port)
	    {
	            switch (port) {

Thanks,

Signature · 1 line
Carlo Caione

Read the cover letter in its thread