Skip to content

ARM: dts: boundary: fix sgtl5000 pinctrl init

Gary Bisson linux-arm-kernel linux-devicetree 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2ARM: dts: imx6qdl-nitrogen6_max: fix sgtl5000 pinctrl initarch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi+2 -21 reply
1/2ARM: dts: imx6qdl-nitrogen6_max: fix sgtl5000 pinctrl init+0 -01 reply
2/2ARM: dts: imx6qdl-nitrogen6_som2: fix sgtl5000 pinctrl initarch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi+2 -20 replies
2/2ARM: dts: imx6qdl-nitrogen6_som2: fix sgtl5000 pinctrl init+0 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] ARM: dts: boundary: fix sgtl5000 pinctrl init

Hi Shawn, all,

While testing other features, I realized that the sound card wouldn't probe on Nitrogen6_MAX. This is because the pinctrl node was under the sound driver node whereas it should be under the codec one.

This caused GPIO_0 not to be set as CLKO1 and therefore the codec probing was failing. The pinctrl node is just moved around to fix it.

Also making the same patch for our SOM2 although it was working, the reason is that U-Boot is setting GPIO_0 in U-Boot for SOM2 and not MAX.

Regards,
Gary

Gary Bisson (2):
ARM: dts: imx6qdl-nitrogen6_max: fix sgtl5000 pinctrl init
ARM: dts: imx6qdl-nitrogen6_som2: fix sgtl5000 pinctrl init

 arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi  | 4 ++--
 arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)
Signature · 1 line
2.11.0