Skip to content

Serial slave device bus

Rob Herring linux-bluetooth linux-serial lkml 4 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v4 Latest5 patches 0 repliesNew
  2. v35 patches 4 repliesSuperseded
  3. v29 patches 21 repliesApplied
Earlier versions · 1
VersionPostedPatchesRepliesStatus
v19 patches32 repliesSuperseded

Patches in v4 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5tty_port: Add port client functionsdrivers/tty/tty_buffer.c drivers/tty/tty_port.c include/linux/tty.h+51 -210 replies
2/5dt/bindings: Add a serial/UART attached device bindingDocumentation/devicetree/bindings/serial/slave-device.txt+36 -00 replies
3/5serdev: Introduce new bus for serial attached devicesMAINTAINERS drivers/char/Kconfig drivers/tty/Makefile +4 more+683 -00 replies
4/5serdev: add a tty port controller driverdrivers/tty/serdev/Kconfig drivers/tty/serdev/Makefile drivers/tty/serdev/serdev-ttyport.c +1 more+255 -00 replies
5/5tty_port: register tty ports with serdev busdrivers/tty/tty_port.c+12 -00 replies

Reviews trailers per patch

4 of 5 patches have a Reviewed-by or Acked-by.

PatchSebastian Reichel
1/5R-b T-b
2/5T-b
3/5R-b T-b
4/5R-b T-b
5/5R-b T-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v4 thread

Cover letter [PATCH v4 0/5] Serial slave device bus

Here's V4 of the serdev bus support. Just 2 small fixes from V3 and Sebastian's Tested-by(Thanks!). I fixed a module build breakage in serdev.h and dropped setting of receive_room. It was only needed for the ldisc->receive_buf() function.

There's a few additions Sebastion needed for more serial port control of RTS/CTS. I think these can be added on top of this series as drivers need them.

Changelog is in individual patches. Previous versions are here[1][2][3]. This series and the mentioned drivers can be found here[4].

Rob

[1] http://www.mail-archive.com/[email protected]/msg1304151.html
[2] http://www.mail-archive.com/[email protected]/msg1311650.html
[3] https://www.mail-archive.com/[email protected]/msg1318626.html
[4] git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git serial-bus-v5

Rob Herring (5):
tty_port: Add port client functions dt/bindings: Add a serial/UART attached device binding
serdev: Introduce new bus for serial attached devices
serdev: add a tty port controller driver
tty_port: register tty ports with serdev bus

 .../devicetree/bindings/serial/slave-device.txt    |  36 ++
 MAINTAINERS                                        |   8 +
 drivers/char/Kconfig                               |   1 +
 drivers/tty/Makefile                               |   1 +
 drivers/tty/serdev/Kconfig                         |  16 +
 drivers/tty/serdev/Makefile                        |   5 +
 drivers/tty/serdev/core.c                          | 421 +++++++++++++++++++++
 drivers/tty/serdev/serdev-ttyport.c                | 224 +++++++++++
 drivers/tty/tty_buffer.c                           |  17 +-
 drivers/tty/tty_port.c                             |  58 ++-
 include/linux/serdev.h                             | 262 +++++++++++++
 include/linux/tty.h                                |   9 +-
 12 files changed, 1037 insertions(+), 21 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/serial/slave-device.txt
 create mode 100644 drivers/tty/serdev/Kconfig
 create mode 100644 drivers/tty/serdev/Makefile
 create mode 100644 drivers/tty/serdev/core.c
 create mode 100644 drivers/tty/serdev/serdev-ttyport.c
 create mode 100644 include/linux/serdev.h
Signature · 1 line
2.10.1