Skip to content

Add basic code support for imx6sll

Shawn Guo linux-arm-kernel linux-clk linux-devicetree linux-gpio 1 version New

Get series with b4
b4 am 20170123061034.GE5662@dragon

Versions newest first

  1. v2 Latest1 of 12 patches 0 repliesNew

1 of 12 patches is in this archive. The cover letter announces 12.

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
5/12Document: dt: binding: imx: update pinctrl doc for imx6sll+0 -02 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH v2 00/12] Add basic code support for imx6sll
Quoted 16 lines · Bai Ping

The i.MX 6SoloLiteLite application processors are NXP's latest additions to a growing family of multimedia-focused products offering high-performance processing optimized for lowest power consumption. The i.MX 6SoloLiteLite processors feature NXP's advanced implementation of the ARM Cortex-A9 core, which can be interfaced with LPDDR3 and LPDDR2 DRAM memory devices.

i.MX6SLL is a new SOC of the i.MX6 family, shares many common modules, so most of the MSL code can be resued from i.MX6 serious SOC.

change for V2:

    -  address comments in dts and dtsi from Fabio.
    -  split the doc update into two patch, fix typo.
    -  address comments in clock driver, add necessary 'const'qualifier.
Quoted 13 lines

Bai Ping (12):
ARM: imx: Add basic msl support for imx6sll
driver: clocksource: add gpt timer for imx6sll
Document: dt: binding: imx: update clock doc for imx6sll
driver: clk: imx: Add clock driver for imx6sll
Document: dt: binding: imx: update pinctrl doc for imx6sll
driver: pinctrl: imx: Add pinctrl driver support for imx6sll
ARM: dts: imx: Add basic dtsi for imx6sll
ARM: dts: imx: Add imx6sll EVK board dts support
ARM: debug: Add low level debug support for imx6sll
ARM: imx: Add suspend/resume support for imx6sll
ARM: imx: correct i.mx6sll dram io low power mode
ARM: configs: enable imx6sll support in defconfig

I do not think you need to necessarily put them into a series, since they will go through different sub-system maintainers. If there are dependencies between them, you should manage to get the prerequisite parts get merged first.

Shawn