mv88e6xxx Watchdog support
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v3 Latest2 patches 6 repliesIn review
- v20 of 2 patches 0 repliesSuperseded
Patches in v3 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/2 | net: dsa: mv88e6xxx: Add watchdog interrupt handlerdrivers/ drivers/ drivers/ +1 more | +127 | 3 replies | |
| 2/2 | net: dsa: mv88e6xxx: Add mv88e6390 watchdog interrupt supportdrivers/ drivers/ drivers/ +1 more | +71 | 2 replies |
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.
Cover letter [PATCH v3 net-next 0/2] mv88e6xxx Watchdog support
The Marvell switches have an in built watchdog over some of the internal state machine. The watchdog can be configured to raise an interrupt on error. The problem the watchdog found is then logged to the kernel log.
The older switches can automagically perform a software reset when the watchdog triggers. This just resets the internal state machine, but leaves the switch configuration unchanged.
The 6390 family of switches cannot both raise an interrupt and automagically perform a software reset. So the interrupt handler has to perform the switch reset, and then re-enable the watchdog interrupts.
This has been tested using hacked together debugfs code which allows the "force" bit to be set, so cause a watchdog interrupt.
v2: Remove g2_prefix
Andrew Lunn (2):
net: dsa: mv88e6xxx: Add watchdog interrupt handler
net: dsa: mv88e6xxx: Add mv88e6390 watchdog interrupt support
drivers/net/dsa/mv88e6xxx/chip.c | 23 ++++++ drivers/net/dsa/mv88e6xxx/global2.c | 137 +++++++++++++++++++++++++++++++++- drivers/net/dsa/mv88e6xxx/global2.h | 6 ++ drivers/net/dsa/mv88e6xxx/mv88e6xxx.h | 33 ++++++++ 4 files changed, 198 insertions(+), 1 deletion(-)
Signature · 1 line
2.11.0