Skip to content

Extend rtc-armada38x support for Armada 7K/8K

Alexandre Belloni linux-arm-kernel linux-rtc 2 versions New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest posting 2/20 of 3 patches 0 repliesNew
  2. v2 posting 1/20 of 3 patches 0 repliesSuperseded

Patches in v2 posting 2/2 No applies recorded yet

None of the 3 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH v2 0/3] Extend rtc-armada38x support for Armada 7K/8K
Quoted 6 lines · Russell King - ARM Linux
Quoted 2 lines

The question being what does that do and whether it could be done in the driver instead.

It's not specific to the Armada 8040, the same problem exists with Armada 38x, so holding this up for that reason does not make sense.

I agree, I will not delay the patch for that.

Quoted 8 lines

I suspect that the errata is "RTC is not reset at power up" for the RTC power domain.

I don't know where the value of 0x2000 comes from for the correction value, all I know is that's the value uboot uses with "date reset". We probably do _not_ want the driver writing that each time the kernel boots, since that's a tuning parameter.

It is probably a calibration offset. It may be worth exposing to userspace but without more information, I doubt we can make something useful out of it.

Signature · 3 lines
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com