Skip to content

ARM: OMAP2+: Add and enable operating-points-v2

Tony Lindgren linux-arm-kernel linux-devicetree linux-omap linux-pm 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 5 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 5 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/5] ARM: OMAP2+: Add and enable operating-points-v2
Quoted 12 lines · Dave Gerlach

Hi,
This series adds the necessary changes to get proper operating-points-v2 tables for AM335x/AM437x/DRA7xx/AM57xx TI SoCs. Doing this enables the ti-cpufreq driver and allows the platform to detect which CPU OPPs are valid for the configuration in use and enable them.

This series adds complete tables for am335x and adds 1GHz support for all beaglebone black boards and updates the already merged but unused am437x table to match the finalized DT bindings. It also moves the existing dra7xx/am57xx OPPs to OPPv2 but does not enable 1.5GHz yet as this requires multiregulator support which will come at a later date.

Quoted 3 lines

Also, now that so many TI platforms will depend on the ti-cpufreq driver let's add CONFIG_ARM_TI_CPUFREQ to omap2plus_defconfig to enable it as part of the default configuration.

Applying all for v4.12 into dt-v2 and defconfig branches.

Thanks,

Tony

Read the cover letter in its thread