phylib EEE updates
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v3 Latest0 of 3 patches 1 replyIn review
- v2 RFC0 of 3 patches 0 repliesSuperseded
- v1 RFC1 patch 1 replySuperseded
Patches in v3 No applies recorded yet
None of the 3 patches the cover letter announces are in this archive.
Reviews trailers per patch
| Patch | Florian Fainelli |
|---|---|
| Series | R-b R-b R-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH v3 0/3] phylib EEE updates
David,
This series of patches depends on the previous set of changes, and is therefore net-next material.
While testing the EEE code, I discovered a number of issues:
1. It is possible to enable advertisment of EEE modes which are not supported by the hardware. We omit to check the supported modes and mask off those modes that are not supported before writing the EEE advertisment register.
2. We need to restart autonegotiation after a change of the EEE advertisment, otherwise the link partner does not see the updated EEE modes.
3. SGMII connected PHYs are also capable of supporting EEE.
Through discussion with Florian, it has been decided to remove the check for the PHY interface mode in patch (3).
drivers/net/phy/phy.c | 37 ++++++++++++++++++++++++++----------- 1 file changed, 26 insertions(+), 11 deletions(-)
v2: fix "phy_restart_aneg" build error identified by 0-day
v3: drop RFC tag, replace 3rd patch
Signature · 3 lines
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up according to speedtest.net.