Skip to content

ftgmac100: Rework batch 5 - Features

Benjamin Herrenschmidt netdev 3 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest9 patches 1 replyIn review
  2. v29 patches 2 repliesSuperseded
  3. v18 patches 6 repliesSuperseded

Patches in v3 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/9ftgmac100: Add ethtool n-way reset calldrivers/net/ethernet/faraday/ftgmac100.c+1 -70 replies
2/9ftgmac100: Add pause frames configuration and supportdrivers/net/ethernet/faraday/ftgmac100.c drivers/net/ethernet/faraday/ftgmac100.h+102 -10 replies
3/9ftgmac100: Add ndo_set_rx_mode() and support for multicast & promiscdrivers/net/ethernet/faraday/ftgmac100.c+52 -00 replies
4/9ftgmac100: Add vlan HW offloaddrivers/net/ethernet/faraday/ftgmac100.c+45 -10 replies
5/9ftgmac100: Add netpoll supportdrivers/net/ethernet/faraday/ftgmac100.c+14 -00 replies
6/9ftgmac100: Allow configuration of phy interface via device-treedrivers/net/ethernet/faraday/ftgmac100.c+39 -30 replies
7/9ftgmac100: Display the discovered PHY device infodrivers/net/ethernet/faraday/ftgmac100.c+3 -00 replies
8/9ftgmac100: Fix potential ordering issue in NAPI polldrivers/net/ethernet/faraday/ftgmac100.c+7 -00 replies
9/9ftgmac100: Document device-tree bindingDocumentation/devicetree/bindings/net/ftgmac100.txt+37 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.

Read the v3 thread

Cover letter [PATCH v3 0/9] ftgmac100: Rework batch 5 - Features

This is the third spin of the fifth and last batch of updates to the ftgmac100 driver.

This contains a few additional "features" such as:

- Support for ethtool n-way reset
- Multicast filtering & promisc support
- Vlan offload
- netpoll

And a couple of misc bits. This also adds the device-tree binding documentation.

v2. - Addresses review comments and adds a new patch fixing a
theorical ordering issue in my new NAPI poll implementation
- Add a bug fix (Patch 8/9) for a potential ordering issue in the new NAPI poll code.

v3. - Rebase on net-next (fix conflict with an unrelated #include
change series)
- Update DT bindings better describing accepted phy-mode values