Skip to content

Enable NAND on Armada-7040-DB board

Boris Brezillon linux-arm-kernel linux-devicetree linux-mtd 1 version New

Get series with b4
b4 am 20171005145343.1ba59fb7@bbrezillon

Versions newest first

  1. v1 Latest0 of 3 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 3 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/3] Enable NAND on Armada-7040-DB board
Quoted 14 lines · On Mon, 25 Sep 2017 16:53:49 +0200 Miquel Raynal…

Hi,

This series adds support for NAND on Armada-7040-DB board.

Besides standard NAND node addition, it also introduces a new compatible string for the pxa3xx_nand driver to support the subitilities of A7k/A8k SoCs, as well as a new property used by the pxa3xx_nand driver to grab a phandle on the system control node in order to enable the NAND controller itself.

Regards,
Miquel

Quoted 6 lines

Gregory CLEMENT (1):
arm64: dts: marvell: add NAND support on the 7040-DB board

Miquel Raynal (2):
Documentation: devicetree: add pxa3xx compatible and syscon property
mtd: nand: pxa3xx: enable NAND controller if the SoC needs it

Applied patch 1 and 2.

Thanks,

Boris

Quoted 8 lines
 .../devicetree/bindings/mtd/pxa3xx-nand.txt        |  4 +++
 arch/arm64/boot/dts/marvell/armada-7040-db.dts     | 24 +++++++++++++
 arch/arm64/boot/dts/marvell/armada-70x0.dtsi       | 14 ++++++++
 .../boot/dts/marvell/armada-cp110-master.dtsi      |  3 +-
 drivers/mtd/nand/pxa3xx_nand.c                     | 41 +++++++++++++++++++---
 5 files changed, 81 insertions(+), 5 deletions(-)

Read the cover letter in its thread