Add support for GE PPD
Get series with b4
b4 am 20171109111927.64ff75e8@jawaVersions newest first
- v5 Latest0 of 8 patches 0 repliesNew
Patches in v5 No applies recorded yet
None of the 8 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v5 yet.
Cover letter [U-Boot] [PATCH v5 0/8] Add support for GE PPD
Hi Martyn,
Quoted 1 line
*** Resend due to previous use of unsubscribed email address ***
Just a small remark.
You may consider using patman to get the list of u-boot community peers to be CC'ed for your patch. Or at least look for a custodian (in MAINTAINERS) responsible to IMX (NXP) SoC part of u-boot (in this case Stefano Babic or Fabio Estevam).
The problem with sending code only to u-boot ML is that it may be overlooked by people, who are the best candidates to review it.
Quoted 69 lines
This series adds support for the GE PPD. The initial patches in this series resolve issues found during development and testing, extend existing support and add new support for devices in the PPD. The final patch in the series adds the board support for the PPD.
Ian Ray (2):
ext4: recover from filesystem corruption when reading
bootcount: add support for bootcounter on EXT filesystemMartyn Welch (3):
pwm: imx: Enable PWM support on i.MX53
arm: mx5: Add more register definitions
board: ge: make VPD code commonNandor Han (2):
imx:mxc_i2c: tweak the i2c transfer method
rtc: add support for s35392aPeter Senna Tschudin (1):
mx53: Add Board support for GE PPDREADME | 7 + arch/arm/include/asm/arch-mx5/crm_regs.h | 8 + arch/arm/include/asm/arch-mx5/imx-regs.h | 50 ++++ arch/arm/mach-imx/mx5/Kconfig | 7 + board/ge/bx50v3/Makefile | 2 +- board/ge/bx50v3/bx50v3.c | 2 +- board/ge/bx50v3/vpd_reader.c | 228 --------------- board/ge/bx50v3/vpd_reader.h | 25 -- board/ge/common/Makefile | 7 + board/ge/common/vpd_reader.c | 197 +++++++++++++ board/ge/common/vpd_reader.h | 17 ++ board/ge/mx53ppd/Kconfig | 17 ++ board/ge/mx53ppd/MAINTAINERS | 7 + board/ge/mx53ppd/Makefile | 12 + board/ge/mx53ppd/imximage.cfg | 87 ++++++ board/ge/mx53ppd/mx53ppd.c | 457 +++++++++++++++++++++++++++++++ board/ge/mx53ppd/mx53ppd_video.c | 135 +++++++++ board/ge/mx53ppd/ppd_gpio.h | 96 +++++++ configs/mx53ppd_defconfig | 39 +++ drivers/Kconfig | 2 + drivers/bootcount/Kconfig | 58 ++++ drivers/bootcount/Makefile | 1 + drivers/bootcount/bootcount_ext.c | 62 +++++ drivers/i2c/mxc_i2c.c | 25 +- drivers/pwm/pwm-imx-util.c | 2 + drivers/rtc/Kconfig | 6 + drivers/rtc/Makefile | 1 + drivers/rtc/s35392a.c | 365++++++++++++++++++++++++
fs/ext4/ext4_common.c|
10 +fs/ext4/ext4fs.c| 10 +-include/configs/mx53ppd.h| 248 +++++++++++++++++
lib/Kconfig | 3 + 32 files changed,
1927 insertions(+), 266 deletions(-) delete mode 100644board/ge/bx50v3/vpd_reader.cdelete mode 100644board/ge/bx50v3/vpd_reader.hcreate mode 100644 board/ge/common/Makefile create mode 100644board/ge/common/vpd_reader.ccreate mode 100644board/ge/common/vpd_reader.hcreate mode 100644 board/ge/mx53ppd/Kconfig create mode 100644 board/ge/mx53ppd/MAINTAINERS create mode 100644 board/ge/mx53ppd/Makefile create mode 100644 board/ge/mx53ppd/imximage.cfg create mode 100644board/ge/mx53ppd/mx53ppd.ccreate mode 100644board/ge/mx53ppd/mx53ppd_video.ccreate mode 100644board/ge/mx53ppd/ppd_gpio.hcreate mode 100644 configs/mx53ppd_defconfig create mode 100644drivers/bootcount/Kconfig
Quoted 4 lines
create mode 100644 drivers/bootcount/bootcount_ext.c create mode 100644 drivers/rtc/s35392a.c create mode 100644 include/configs/mx53ppd.h
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de -------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171109/e2321c45/attachment.sig>