Skip to content

dra7: mmc: Update mmc dt node

Kishon Vijay Abraham I linux-arm-kernel linux-devicetree linux-omap lkml 2 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest15 patches 6 repliesIn review
  2. v114 patches 3 repliesSuperseded

Changes in v2 from the cover letter

*) Avoid defining duplicate pinctrl groups.
*) Remove keystone specific patches
*) Add vqmmc-supply and remove mm specific pinmux in dra7-evm

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/15ARM: multi_v7_defconfig: Enable CONFIG_MMC_SDHCI_OMAParch/arm/configs/multi_v7_defconfig+1 -00 replies
2/15ARM: omap2plus_defconfig: Enable CONFIG_MMC_SDHCI_OMAParch/arm/configs/omap2plus_defconfig+3 -00 replies
3/15ARM: dts: dra76x: Create a common file with MMC/SD IOdelay dataarch/arm/boot/dts/dra76x-mmc-iodelay.dtsi+285 -00 replies
4/15ARM: dts: dra76-evm: Shift to using common IOdelay dataarch/arm/boot/dts/dra76-evm.dts+1 -400 replies
5/15ARM: dts: dra76-evm: Add pinctrl data for higher speed MMC/SD modesarch/arm/boot/dts/dra76-evm.dts+6 -20 replies
6/15ARM: dts: am57xx-beagle-x15: Add "vqmmc-supply" property for mmc2arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi+1 -00 replies
7/15ARM: dts: dra7-evm: Remove mmc specific pinmuxarch/arm/boot/dts/dra7-evm.dts+0 -270 replies
8/15ARM: dts: dra7-evm: Add "vqmmc-supply" property for mmc2arch/arm/boot/dts/dra7-evm.dts+1 -00 replies
9/15ARM: dts: am57xx-idk: Add "vqmmc-supply" property for mmc2arch/arm/boot/dts/am57xx-idk-common.dtsi+1 -00 replies
10/15ARM: dts: dra76-evm: Add "vqmmc-supply" property for mmc2arch/arm/boot/dts/dra76-evm.dts+1 -00 replies
11/15ARM: dts: dra71-evm: Correct evm_sd regulator max voltagearch/arm/boot/dts/dra71-evm.dts+2 -20 replies
12/15ARM: dts: dra71-evm: Select pull down for mmc1_clk line in default modearch/arm/boot/dts/dra71-evm.dts+13 -00 replies
13/15ARM: dts: am57xx-idk: Select pull down for mmc1_clk line in default modearch/arm/boot/dts/am571x-idk.dts arch/arm/boot/dts/am572x-idk.dts arch/arm/boot/dts/am57xx-idk-common.dtsi+13 -30 replies
14/15ARM: dts: dra7: Use sdhci-omap programming modelarch/arm/boot/dts/am57xx-beagle-x15-common.dtsi arch/arm/boot/dts/am57xx-idk-common.dtsi arch/arm/boot/dts/dra7-evm.dts +3 more+12 -140 replies
15/15ARM: dts: dra7: Add high speed modes capability to MMC1/MMC2 dt nodearch/arm/boot/dts/dra7.dtsi+10 -06 replies

Reviews trailers per patch

None of the 15 patches has a Reviewed-by or Acked-by.

PatchJean-Jacques Hiblot
1/15
2/15
3/15T-b
4/15T-b
5/15
6/15
7/15
8/15
9/15
10/15
11/15
12/15
13/15
14/15
15/15

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH v2 00/15] dra7: mmc: Update mmc dt node

The previous version of the patch series was sent with subject
ARM: dra7/k2g: Use sdhci-omap for MMC/SD controller

This series
*) Adds missing vqmmc-supply property
*) Adds pinctrl data (including IOdelay) for dra76
*) Updates pinctrl data (to select pull down for mmc1_clk) on some of the
platforms
*) Uses sdhci-omap programming model (depends on [1])

Changes from v1:
*) Avoid defining duplicate pinctrl groups.
*) Remove keystone specific patches
*) Add vqmmc-supply and remove mm specific pinmux in dra7-evm

"ARM: dts: dra7: Add high speed modes capability to MMC1/MMC2 dt node" patch can be merged only after [1]. Other patches don't have dependency.

The defconfig patches should be merged before "ARM: dts: dra7: Use sdhci-omap programming model"

[1] -> https://lkml.org/lkml/2018/2/5/230

Kishon Vijay Abraham I (11):
ARM: multi_v7_defconfig: Enable CONFIG_MMC_SDHCI_OMAP
ARM: omap2plus_defconfig: Enable CONFIG_MMC_SDHCI_OMAP
ARM: dts: am57xx-beagle-x15: Add "vqmmc-supply" property for mmc2
ARM: dts: dra7-evm: Remove mmc specific pinmux
ARM: dts: dra7-evm: Add "vqmmc-supply" property for mmc2
ARM: dts: am57xx-idk: Add "vqmmc-supply" property for mmc2
ARM: dts: dra76-evm: Add "vqmmc-supply" property for mmc2
ARM: dts: dra71-evm: Select pull down for mmc1_clk line in default
mode
ARM: dts: am57xx-idk: Select pull down for mmc1_clk line in default
mode
ARM: dts: dra7: Use sdhci-omap programming model
ARM: dts: dra7: Add high speed modes capability to MMC1/MMC2 dt node

Ravikumar Kattekola (1):
ARM: dts: dra71-evm: Correct evm_sd regulator max voltage

Sekhar Nori (3):
ARM: dts: dra76x: Create a common file with MMC/SD IOdelay data
ARM: dts: dra76-evm: Shift to using common IOdelay data
ARM: dts: dra76-evm: Add pinctrl data for higher speed MMC/SD modes

 arch/arm/boot/dts/am571x-idk.dts                |   2 +-
 arch/arm/boot/dts/am572x-idk.dts                |   3 +-
 arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi |   4 +-
 arch/arm/boot/dts/am57xx-idk-common.dtsi        |  14 +-
 arch/arm/boot/dts/dra7-evm.dts                  |  29 +--
 arch/arm/boot/dts/dra7.dtsi                     |  25 ++-
 arch/arm/boot/dts/dra71-evm.dts                 |  17 +-
 arch/arm/boot/dts/dra72-evm-common.dtsi         |   2 +-
 arch/arm/boot/dts/dra76-evm.dts                 |  53 +----
 arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi       | 285 ++++++++++++++++++++++++
 arch/arm/configs/multi_v7_defconfig             |   1 +
 arch/arm/configs/omap2plus_defconfig            |   3 +
 12 files changed, 350 insertions(+), 88 deletions(-)
 create mode 100644 arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi
Signature · 1 line
2.11.0