Marvell NAND controller rework with ->exec_op()
Get series with b4
b4 am 20180107220911.31844b3a@xps13Versions newest first
- v1 Latest0 of 12 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 12 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH 00/12] Marvell NAND controller rework with ->exec_op()
Hi Robert,
Quoted 11 lines · On Sun, 07 Jan 2018 21:55:33 +0100 Robert Jarzmik <[email protected]>…
Quoted 3 lines · Boris Brezillon
Quoted 1 line · On Wed, 3 Jan 2018 21:10:28 +0100 Boris Brezillon…
Hm, that's weird. Can you try with the old driver (pxa3xx)?
Ah you're right, my NAND was damaged ...
Quoted 2 lines
Alternatively, you can type 'nand bad' from uboot to check if it detects the same bad blocks.
Mmmh no, the SPL is barebox in my case. Do you have a command in linux or barebox to do the same thing ?
Not sure, but nand -i should do the trick.
https://www.barebox.org/doc/latest/commands/hwmanip/nand.html
But I am not sure this is still relevant now we know the NAND was damaged by the previous experiments (sorry about that). Can you put the NAND in a clean state and report us if it is still failing?
Thanks for your help,
Miqu?l