Skip to content

Provide SPL support for bootcount (in the case of using falcon boot mode)

Lukasz Majewski u-boot 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest5 patches 1 replyIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5bootcount: config: Make the SYS_BOOTCOUNT_ADDR available also for non EXT setupsdrivers/bootcount/Kconfig+6 -71 reply
2/5bootcount: Add function wrappers to handle bootcount increment and error checkinginclude/bootcount.h+25 -00 replies
3/5spl: bootcount: Enable bootcount support in SPLcommon/spl/Kconfig drivers/Makefile+10 -00 replies
4/5config: display5: Enable boot count feature in the display5 boardconfigs/display5_defconfig+5 -00 replies
5/5arm: display5: Extend SPL to support bootcount checkingboard/liebherr/display5/spl.c+3 -10 replies

Reviews trailers per patch

1 of 5 patches has a Reviewed-by or Acked-by.

PatchIan Ray
1/5R-b
2/5
3/5
4/5
5/5

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [U-Boot] [PATCH v1 0/5] Provide SPL support for bootcount (in the case of using falcon boot mode)

This patch series provides support for controlling bootcount limits in SPL. It also enables this feature on display5 board to present usage patterns.

"Green" travis CI build:
https://travis-ci.org/lmajewski/u-boot-dfu

This patch has been applied on top of u-boot/master:
SHA1: 1811a928c6c7604d6d05a84b4d552a7c31b4994e

This patch series shall be applied on top of:
[U-Boot,1/2] Convert CONFIG_BOOTCOUNT_LIMIT to Kconfig
http://patchwork.ozlabs.org/patch/871585/

[U-Boot,2/2] Convert CONFIG_SYS_BOOTCOUNT_SINGLEWORD to Kconfig
http://patchwork.ozlabs.org/patch/871586/

Lukasz Majewski (5):
bootcount: config: Make the SYS_BOOTCOUNT_ADDR available also for non
EXT setups
bootcount: Add function wrappers to handle bootcount increment and
error checking
spl: bootcount: Enable bootcount support in SPL
config: display5: Enable boot count feature in the display5 board
arm: display5: Extend SPL to support bootcount checking

 board/liebherr/display5/spl.c |  4 +++-
 common/spl/Kconfig            |  9 +++++++++
 configs/display5_defconfig    |  5 +++++
 drivers/Makefile              |  1 +
 drivers/bootcount/Kconfig     | 13 ++++++-------
 include/bootcount.h           | 25 +++++++++++++++++++++++++
 6 files changed, 49 insertions(+), 8 deletions(-)
Signature · 1 line
2.11.0