Skip to content

ARM: omap3: beagle, evm: synchronize common setup

Derald D. Woods u-boot 6 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest3 patches 0 repliesNew
  2. v2 posting 4/40 of 3 patches 0 repliesSuperseded
  3. v2 posting 3/40 of 3 patches 0 repliesSuperseded
Earlier versions · 3
VersionPostedPatchesRepliesStatus
v2 posting 2/40 of 3 patches0 repliesSuperseded
v2 posting 1/43 patches0 repliesSuperseded
v1 RFC3 patches0 repliesSuperseded

Changes in v3 from the cover letter

- Leave environment in NAND

Patches in v3 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3ARM: omap3: beagle: Set 'mtdids' and 'mtdparts' in board fileboard/ti/beagle/beagle.c+8 -01 reply
2/3ARM: omap3: beagle: Enable DM_SERIAL, update distro usage and NAND layoutconfigs/omap3_beagle_defconfig include/configs/omap3_beagle.h+152 -1121 reply
3/3ARM: omap3: evm: Sync with omap3_beagle configurationconfigs/omap3_evm_defconfig include/configs/omap3_evm.h+52 -401 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.

Read the v3 thread

Cover letter [U-Boot] [PATCH v3 0/3] ARM: omap3: beagle, evm: synchronize common setup

This short series is an attempt to make this set of boards use the same default configuration items where possible. This was prompted by an investigation into enabling SERIAL_SEARCH_ALL on omap3_evm. This feature now works for omap3_evm after this series.

The series changes the default NAND layout of MTDPARTS_DEFAULT. More detail is provided with the patches. As most things are configurable now, this should not be an issue. I am trying to get simple defaults that just boot and expose the common core features. This will make future testing and maintenance a bit more predictable, as there will be a very similar and comparable set of boards.

Derald D. Woods (3):
ARM: omap3: beagle: Set 'mtdids' and 'mtdparts' in board file
ARM: omap3: beagle: Enable DM_SERIAL, update distro usage and NAND
layout
ARM: omap3: evm: Sync with omap3_beagle configuration

 board/ti/beagle/beagle.c       |   8 ++
 configs/omap3_beagle_defconfig |  25 ++++-
 configs/omap3_evm_defconfig    |  21 ++--
 include/configs/omap3_beagle.h | 239 +++++++++++++++++++++++------------------
 include/configs/omap3_evm.h    |  71 ++++++------
 5 files changed, 212 insertions(+), 152 deletions(-)

--

v3:
- Leave environment in NAND

v2:
- update cover letter and remove 'RFC' from series
- rebase and test on recent master

Signature · 1 line
2.16.2