Skip to content

Bring NAND support to Nintendo NES Classic

Boris Brezillon u-boot 1 version New

Get series with b4
b4 am 20180222150619.3d43c05d@bbrezillon

Versions newest first

  1. v2 Latest2 of 20 patches 0 repliesNew

2 of 20 patches are in this archive. The cover letter announces 20.

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
5/20spl: nand: sunxi: introduce the nand_wait_int() helper+0 -00 replies
9/20spl: nand: sunxi: ensure enough time has passed after changing the column+0 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [U-Boot] [PATCH v2 00/20] Bring NAND support to Nintendo NES Classic
Quoted 107 lines · On Thu, 22 Feb 2018 15:06:19 +0100 Boris Brezillon…
Quoted 95 lines · On Thu, 22 Feb 2018 14:33:30 +0100 Miquel Raynal <[email protected]>…

Hello,

This series first adds fixes and enhancements to sunxi NAND drivers (SPL and U-Boot). Once this is done, the SPL NAND driver is converted to use PIO instead of DMA with the goal to support all SoCs with this IP without the need for DMA-related code. Finally, NAND support is added to Nintendo NES Classic through Kconfig and DT additions.

Thanks,
Miquèl

Changes since v1:
=================

All:
----
- Enhance all commit messages.
- Rebased on top of master branch (I should have done that earlier but I forgot I was on an old revision).

Fix binman_sym output check
---------------------------
- SPL seems to be broken for a few weeks when using raw NAND, fix it by changing the error condition.

Fix strength
------------
- Add comment explaining the added line and moved the line for clarification on why it is needed.
- Add forgotten Boris' Suggested-by tag.

Fix second case of modulo by zero error
----------------------------------------
- Added a reference to the first occurence of this issue.

Allow SPL to be compiled for sun8i platforms
--------------------------------------------
- This commit is not about compiling the SPL, but the NAND support in the SPL, as corrected by Maxime.

Enhancements and cleaning
-------------------------
- Patch split into several logical chunks, as requested.
- Removed useless udelay(1), that was added for debugging purpose.
- Introduced the nand_exec_cmd() helper to mutualize code one step further.
- Add an udelay(1) after changing the column to respect the minimum tCCS delay (Change Column Setup time).
- Canceled moving to global scope the ecc_strength array.

Use PIO instead of DMA
----------------------
- Change commit message/title.
- Cancel removing NFC related definitions: they can be useful as the this IP is quite under-documented.
- Merge nand_reset_column and nand_change_column (in another patch).
- Moved the copy of the data after the check of the ECC status.
- ECC chunks are read manually, return if the first chunk is empty only (needed for configuration research), otherwise it should not be treated as an error.

Add NAND node to sun8i
----------------------
- U-Boot master branch already has this node, remove the patch.

Enable NAND on NES classic
--------------------------
- Change the DT cells size from 2 to 1.

Add NAND support for NES classic
--------------------------------
- Split in several patches, moving SPL_NAND_SUPPORT and NAND_SUNXI out of the defconfig files (NES and CHIP pro) to be automatically selected depending on NAND_SUNXI and ARCH_SUNXI.
- Moved the NAND parameters to Kconfig (only for SUNXI because the tool did not work as expected, maybe due to some definitions that are not "numbers" but multiplications and sometimes use other definitions (NAND page size, 2K_SZ, etc).

Miquel Raynal (20):
spl: fix binman_sym output check
mtd: nand: sunxi: fix ECC strength choice
spl: nand: sunxi: fix second case of modulo by zero error
spl: nand: sunxi: fix typo on register name
spl: nand: sunxi: introduce the nand_wait_int() helper
spl: nand: sunxi: introduce the nand_wait_cmd_fifo_empty() helper
spl: nand: sunxi: add missing status clear
spl: nand: sunxi: create an helper to handle command execution
spl: nand: sunxi: ensure enough time has passed after changing the
column
spl: nand: sunxi: make the reset column helper more generic
sunxi: spl: deassert the NAND controller reset line
spl: nand: sunxi: declare the ecc_bytes array globally

Quoted 8 lines

spl: nand: sunxi: use PIO instead of DMA
sunxi: spl: remove DMA related settings of the NAND controller
sunxi: allow NAND support in SPL to be compiled for sun8i platforms
sunxi: dts: enable NAND on NES classic
sunxi: automatically select SPL_NAND_SUPPORT in Kconfig
sunxi: make NAND_SUNXI use ARCH_SUNXI as default in Kconfig
sunxi: move the NAND parameters to Kconfig
configs: add NAND support for NES Classic

Quoted 3 lines

on all NAND related patches.

I've been told that my statement was a bit ambiguous since all patches in this series are related to supporting NAND on sun8i, so I'll clarify a bit. My ack applies to all patches containing 'nand' in their subject :P.

Quoted 17 lines
Quoted 14 lines

 arch/arm/dts/sun8i-a23-a33.dtsi                    |  18 ++
 .../dts/sun8i-r16-nintendo-nes-classic-edition.dts |  14 ++
 arch/arm/include/asm/arch-sunxi/clock_sun6i.h      |   6 +
 board/sunxi/board.c                                |   6 +-
 common/spl/spl.c                                   |  10 +-
 configs/CHIP_pro_defconfig                         |   6 +-
 configs/Nintendo_NES_Classic_Edition_defconfig     |   4 +
 drivers/mtd/nand/Kconfig                           |  26 ++-
 drivers/mtd/nand/sunxi_nand.c                      |   8 +-
 drivers/mtd/nand/sunxi_nand_spl.c                  | 242 ++++++++++-----------
 10 files changed, 206 insertions(+), 134 deletions(-)
Signature · 3 lines
Boris Brezillon, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com