Skip to content

SFP updates

Russell King - ARM Linux linux-devicetree netdev 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 4 patches 1 replyIn review

Patches in v1 No applies recorded yet

None of the 4 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH net-next 0/4] SFP updates

Included in this series are a further few updates for SFP support:

- Adding support for Fiberstore's non-standard BiDi modules operating at 1310nm/1550nm wavelengths rather than the 1000BASE-BX standard of 1310nm/1490nm.
- Adding support for negotiating the PHY interface mode with the MAC, so that modules supporting faster speeds and Gigabit ethernet work with Gigabit-only MACs.
- Adding support for high power (>1W) SFP modules.

 Documentation/devicetree/bindings/net/sff,sfp.txt |   5 +
 drivers/net/phy/phylink.c                         |  33 +++--
 drivers/net/phy/sfp-bus.c                         | 162 ++++++++++------------
 drivers/net/phy/sfp.c                             | 150 +++++++++++++++++---
 include/linux/sfp.h                               |  18 +--
 5 files changed, 243 insertions(+), 125 deletions(-)
Signature · 3 lines
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 8.8Mbps down 630kbps up
According to speedtest.net: 8.21Mbps down 510kbps up