Skip to content

am335x_boneblack: Enable fastboot flash support

Lukasz Majewski u-boot 1 version New

Get series with b4
b4 am 20180227225627.65b34c2f@jawa

Versions newest first

  1. v1 Latest2 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2omap: Fix AM335x build with enabled fastboot flash+0 -00 replies
2/2configs: am335x_boneblack: Enable fastboot flash capability+0 -00 replies

Reviews trailers per patch

All 2 patches have a Reviewed-by or Acked-by.

PatchLukasz Majewski
1/2A-b
2/2A-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/2] am335x_boneblack: Enable fastboot flash support

Hi Sam,

Quoted 8 lines

Standard and recommended way to upgrade the firmware is DFU. But DFU has extremely low transmission speed (around 150 KiB/sec), thus it's a bad fit for flashing big images (like rootfs). Low DFU speed is mostly due to next reasons (kudos to Ruslan Bilovol for investigation): 1. DFU works only via EP0, per DFU specification [1]. But AM335x doesn't have DMA for EP0, according to AM335x TRM [2]: from
section 16.2:

Quoted 6 lines

"The CPPI DMA can be used to service Endpoints 1 to 15 not
Endpoint 0. CPU access method is used to service Endpoint 0 transactions."

2. Max transmission packet size via EP0 is 64 bytes, whereas for
other endpoints max transmission packet size is 512 bytes

DFU was (and still is) supposed to work on all devices - even those with very tiny resources (like st microcontrollers).

According to USB spec, EP0 is mandatory, so that is the reason for using it as a common denominator.

Just for the record - fastboot is one of the options here.

For BBB you may want to look at "dfu tftp" - which uses ETH's tftp protocol with dfu backend. It is supposed to be a remedy for problem described above.

More information at:
./doc/README.dfutftp

Of course I also don't mind using fastboot - it depends on your use case.

Quoted 11 lines

fastboot specification [3], on the other hand, says nothing about which EP should be used (and I see that EP1 is used on BBB board). So let's enable fastboot flash support on BeagleBone Black board to provide a better way to flash big images via USB.

[1] www.usb.org/developers/docs/devclass_docs/DFU_1.1.pdf
[2] www.ti.com/lit/ug/spruh73p/spruh73p.pdf
[3]
https://android.googlesource.com/platform/system/core/+/master/fastboot/README.md

Quoted 8 lines

Sam Protsenko (2):
omap: Fix AM335x build with enabled fastboot flash
configs: am335x_boneblack: Enable fastboot flash capability

 arch/arm/mach-omap2/utils.c        | 2 ++
 configs/am335x_boneblack_defconfig | 2 ++
 2 files changed, 4 insertions(+)

Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de -------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180227/f5c573c9/attachment.sig>