Skip to content

Add support of SD3.0 UHS modes for ZynqMP

Tom Rini u-boot 2 versions New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest posting 2/20 of 7 patches 0 repliesNew
  2. v3 posting 1/24 of 7 patches 0 repliesSuperseded

Patches in v3 posting 2/2 No applies recorded yet

None of the 7 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.

Read the v3 thread

Cover letter [U-Boot] [UBOOT PATCH v3 0/7] Add support of SD3.0 UHS modes for ZynqMP
Quoted 37 lines · Michal Simek

Dne po, 30. dub 2018 16:22 uživatel Tom Rini <[email protected]> napsal:

Quoted 35 lines · Michal Simek
Quoted 22 lines

Hi Tom,

Quoted 19 lines · Siva Durga Prasad Paladugu

This patch series is meant to add SD3.0 support for ZynqMP platform.
The first five patches in the series mostly setting up things in sdhci layer to support SD3.0 , the sixth patch is to add SD3.0 support for ZynqMP platform and the last patch is to enable this support for ZynqMP zcu102 rev1.0 eval board.

Siva Durga Prasad Paladugu (7):
mmc: sdhci: Add support for disabling clock
mmc: sdhci: Handle execute tuning command in sdhci_send_command
sdhci: Add new sdhci ops for platform specific tuning and delays
mmc: sdhci: Invoke platform specific tuning and delay routines mmc : sdhci: Read capabilities register1 and update host caps
mmc: zynq_sdhci: Add support for SD3.0
zynqmp: zcu102: Enable UHS support for ZCU102 Rev1.0 board

 board/xilinx/zynqmp/Makefile                  |   2 +
 board/xilinx/zynqmp/tap_delays.c              | 229

+++++++++++++++++++++++++

Quoted 3 lines
Quoted 3 lines
 configs/xilinx_zynqmp_zcu102_rev1_0_defconfig |   2 +
 drivers/mmc/sdhci.c                           |  63 ++++++-
 drivers/mmc/zynq_sdhci.c                      | 231

+++++++++++++++++++++++++-

Quoted 7 lines
Quoted 6 lines
 include/sdhci.h                               |   8 +
 include/zynqmp_tap_delay.h                    |  20 +++
 7 files changed, 547 insertions(+), 8 deletions(-)
 create mode 100644 board/xilinx/zynqmp/tap_delays.c
 create mode 100644 include/zynqmp_tap_delay.h
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines

It looks like that Jaehoon is out or busy with something else. Can you please recommend someone to take a look at these patches? Definitely feel free to look at it self.

Are these things that need to come in for v2018.05 to fix regressions or new support? Thanks!

New support.

Then yes, assuming Jaehoon doesn't pick it up shortly after v2018.05 feel free to grab it for one of your trees, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180430/39b12051/attachment.sig>