Skip to content

rockchip: allow rk3188 to boot from mmc devices

Heiko Stuebner u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest4 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4mmc: dw_mmc: check fifo status with a timeout in fifo modedrivers/mmc/dw_mmc.c include/dwmmc.h+32 -22 replies
2/4rockchip: dwmmc: add rk2928-dw-mshc compatibledrivers/mmc/rockchip_dw_mmc.c+1 -02 replies
3/4rockchip: rk3188: add u-boot-specific mmc propertiesarch/arm/dts/rk3188-radxarock-u-boot.dtsi+15 -02 replies
4/4rockchip: rk3188: explicitly set vcc_sd0 pin to gpio on rk3188-radxarockarch/arm/dts/rk3188-radxarock.dts+8 -02 replies

Reviews trailers per patch

All 4 patches have a Reviewed-by or Acked-by.

PatchPhilipp Tomsich
1/4R-b A-b
2/4R-b A-b
3/4R-b A-b
4/4R-b A-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/4] rockchip: allow rk3188 to boot from mmc devices

With this series I can now sucessfully boot from a sd-card, with even big kernels being read sucessfully.

Patch 1 is not strictly necessary for that but was a result of me investigating the mmc hang which even hung the whole uboot.

Heiko Stuebner (4):
mmc: dw_mmc: check fifo status with a timeout in fifo mode
rockchip: dwmmc: add rk2928-dw-mshc compatible
rockchip: rk3188: add u-boot-specific mmc properties
rockchip: rk3188: explicitly set vcc_sd0 pin to gpio on

    rk3188-radxarock
 arch/arm/dts/rk3188-radxarock-u-boot.dtsi | 15 +++++++++++
 arch/arm/dts/rk3188-radxarock.dts         |  8 ++++++
 drivers/mmc/dw_mmc.c                      | 32 +++++++++++++++++++++--
 drivers/mmc/rockchip_dw_mmc.c             |  1 +
 include/dwmmc.h                           |  2 ++
 5 files changed, 56 insertions(+), 2 deletions(-)
Signature · 1 line
2.18.0