Update am437x and am335x dts to probe with ti-sysc
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 4 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 4 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH 0/4] Update am437x and am335x dts to probe with ti-sysc
Quoted 15 lines · Keerthy
I tried Branch [1] above. AM335x-boneblack is doing all good with ds0. AM437x-gp the following is happening:
https://pastebin.ubuntu.com/p/fmZNYgJ9Sp/
There seems to be a timeout due to which resume is not immediate i see 1-2s delay and i see i2c timeout.
[ 402.247271] omap_i2c 4802a000.i2c: controller timed out [ 402.247441] pixcir_ts 1-005c: pixcir_int_enable: can't read reg 0x34 : -110 [ 402.247486] pixcir_ts 1-005c: Failed to disable interrupt generation: -110 [ 402.247522] pixcir_ts 1-005c: Failed to stop [ 402.247607] dpm_run_callback(): pixcir_i2c_ts_resume+0x0/0x98
Quoted 6 lines
[
pixcir_i2c_ts] returns -110so
pixcir_i2c_ts_resumeis retuning -110 which is timeout error code.I did some touch screen testing after DS0 resume seems to be working. Everything is in pastebin link provided above.
Thanks for testing. Hmm no idea what might be going on with the pixcir. I have edt-ft5x06 on the am437x-sk-evm and that behaves just fine for suspend and resume. Both are on i2c1, pixcir calls pixcir_start/stop from suspend and resume while edt-ft5x06 does not reconfigure anything.
I'll try read some edt-ft5x06 register values on suspend and resume, let's see if that makes it reproducable here.
Regards,
Tony