Skip to content

spi: fsl-lpspi: Option to prevent FIFO under/overrun

Hieu Tran Dang linux-devicetree linux-spi lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 4 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2dt-bindings: spi: fsl-lpspi: Option to allow stallingDocumentation/devicetree/bindings/spi/spi-fsl-lpspi.txt+2 -04 replies
2/2spi: fsl-lpspi: Option to prevent FIFO under/overrundrivers/spi/spi-fsl-lpspi.c+9 -10 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] spi: fsl-lpspi: Option to prevent FIFO under/overrun

Certain devices don't work well when a transmit FIFO underrun or receive FIFO overrun occurs. Example is the SAF400x radio chip when running at high speed which leads to garbage being sent to/received from the chip. In which case, it should stall waiting for further data to be available before proceeding. This patch add option to configure the SPI controller to allow stalling (unset NOSTALL bit in CFGR1).

Hieu Tran Dang (2):
dt-bindings: spi: fsl-lpspi: Option to allow stalling
spi: fsl-lpspi: Option to prevent FIFO under/overrun

 .../devicetree/bindings/spi/spi-fsl-lpspi.txt          |  2 ++
 drivers/spi/spi-fsl-lpspi.c                            | 10 +++++++++-
 2 files changed, 11 insertions(+), 1 deletion(-)
Signature · 1 line
2.17.1