Skip to content

Update am437x and am335x dts to probe with ti-sysc

Tony Lindgren linux-arm-kernel linux-devicetree linux-omap 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 4 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 4 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/4] Update am437x and am335x dts to probe with ti-sysc
Quoted 7 lines · Keerthy
Quoted 1 line · Tony Lindgren

The following works for me, does it look OK to you?

This works pretty well with DS0 on am437x-gp-evm. Tested rtc wakeup, wakeup using uart and touch. All of the work well.

https://pastebin.ubuntu.com/p/RJhJJKhJHX/

OK good to hear and thanks for testing again.

Quoted 9 lines

Also tested on beaglebone black DS0 works fine. Although there seems to be an additional warning which was not seen before:

"l4-wkup-clkctrl:0008:0: failed to disable"

log: https://pastebin.ubuntu.com/p/Ns2WRdVkXS/

Also the above warning is present without/with this patch on [0]. No such warnings on am4 though.

OK. For am335x I'll post an updated version of the am335x changes to fix the gpio dbck offset.

Regards,

Tony

Quoted 2 lines

[0]
https://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git/log/?h=omap-for-v4.20/dt-ti-sysc-tmp-testing