Skip to content

Support HMS Profinet Card over Anybus

Sven Van Asbroeck linux-devicetree lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest4 patches 9 repliesIn review

Changes in v1 from the cover letter

first shot

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4mfd: support the Arcx anybus bridge.drivers/mfd/Kconfig drivers/mfd/Makefile drivers/mfd/anybus-bridge.c +1 more+481 -03 replies
2/4dt-bindings: anybus-bridge: document devicetree binding.Documentation/devicetree/bindings/mfd/arcx,anybus-bridge.txt Documentation/devicetree/bindings/vendor-prefixes.txt+38 -03 replies
3/4bus: support HMS Anybus-S bus.drivers/bus/Kconfig drivers/bus/Makefile drivers/bus/anybuss-host.c +1 more+1413 -02 replies
4/4misc: support HMS Profinet IRT industrial controller.drivers/misc/Kconfig drivers/misc/Makefile drivers/misc/hms-profinet.c +2 more+874 -01 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH anybus v1 0/4] Support HMS Profinet Card over Anybus

This patch set adds support for the HMS Industrial Networks AB Profinet card.

Profinet is an industry technical standard for data communication over Industrial Ethernet, designed for collecting data from, and controlling, equipment in industrial systems, with a particular strength in delivering data under tight time constraints (on the order of 1ms or less).

The profinet card itself is connected to the system via an industrial bus called 'anybus'.

I have followed the bus driver/client driver pattern, and created an anybus bus driver, plus a client driver for the profinet card.

In case this patch set gets (eventually) accepted, drivers for other anybus client cards may follow: flnet, cc-link, ...

The anybus slot on the host is located on an 'anybus bridge', which is custom h/w designed by Arcx. Its driver is modeled as an mfd, which instantiates two anybus slots.

v1:
first shot

Sven Van Asbroeck (4):
mfd: support the Arcx anybus bridge.
dt-bindings: anybus-bridge: document devicetree binding.
bus: support HMS Anybus-S bus.
misc: support HMS Profinet IRT industrial controller.

 .../bindings/mfd/arcx,anybus-bridge.txt       |   37 +
 .../devicetree/bindings/vendor-prefixes.txt   |    1 +
 drivers/bus/Kconfig                           |   11 +
 drivers/bus/Makefile                          |    1 +
 drivers/bus/anybuss-host.c                    | 1301 +++++++++++++++++
 drivers/mfd/Kconfig                           |   11 +
 drivers/mfd/Makefile                          |    1 +
 drivers/mfd/anybus-bridge.c                   |  441 ++++++
 drivers/misc/Kconfig                          |   11 +
 drivers/misc/Makefile                         |    1 +
 drivers/misc/hms-profinet.c                   |  747 ++++++++++
 include/linux/anybuss-client.h                |  100 ++
 include/linux/anybuss-host.h                  |   28 +
 include/uapi/linux/hms-common.h               |   14 +
 include/uapi/linux/hms-profinet.h             |  101 ++
 15 files changed, 2806 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/arcx,anybus-bridge.txt
 create mode 100644 drivers/bus/anybuss-host.c
 create mode 100644 drivers/mfd/anybus-bridge.c
 create mode 100644 drivers/misc/hms-profinet.c
 create mode 100644 include/linux/anybuss-client.h
 create mode 100644 include/linux/anybuss-host.h
 create mode 100644 include/uapi/linux/hms-common.h
 create mode 100644 include/uapi/linux/hms-profinet.h
Signature · 1 line
2.17.1