Skip to content

powerpc/perf: IMC trace-mode support

Anju T Sudhakar linuxppc-dev lkml 5 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v4 Latest posting 2/25 patches 1 replyIn review
  2. v4 posting 1/25 patches 2 repliesSuperseded
  3. v35 patches 0 repliesSuperseded
Earlier versions · 2
VersionPostedPatchesRepliesStatus
v25 patches4 repliesSuperseded
v14 patches0 repliesSuperseded

Changes in v4 from the cover letter

* trace_imc_refc is introduced. So that even if, core-imc is disabled, trace-imc can be used.

* trace_imc_pmu_sched_task is removed and opal start/stop is invoked in trace_imc_event_add/del function.

Patches in v4 posting 2/2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5powerpc/include: Add data structures and macros for IMC trace modearch/powerpc/include/asm/imc-pmu.h arch/powerpc/include/asm/opal-api.h+40 -01 reply
2/5powerpc/perf: Rearrange setting of ldbar for thread-imcarch/powerpc/perf/imc-pmu.c+17 -110 replies
3/5powerpc/perf: Add privileged access check for thread_imcarch/powerpc/perf/imc-pmu.c+3 -00 replies
4/5powerpc/perf: Trace imc events detection and cpuhotplugarch/powerpc/perf/imc-pmu.c arch/powerpc/platforms/powernv/opal-imc.c include/linux/cpuhotplug.h+108 -00 replies
5/5powerpc/perf: Trace imc PMU functionsarch/powerpc/perf/imc-pmu.c+204 -10 replies

Reviews trailers per patch

4 of 5 patches have a Reviewed-by or Acked-by.

PatchMadhavan Srinivasan
1/5R-b
2/5R-b
3/5
4/5R-b
5/5R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v4 thread

Cover letter [PATCH v4 0/5] powerpc/perf: IMC trace-mode support

IMC (In-Memory collection counters) is a hardware monitoring facility that collects large number of hardware performance events.
POWER9 support two modes for IMC which are the Accumulation mode and Trace mode. In Accumulation mode, event counts are accumulated in system Memory. Hypervisor then reads the posted counts periodically or when requested. In IMC Trace mode, the 64 bit trace scom value is initialized with the event information. The CPMC*SEL and CPMC_LOAD in the trace scom, specifies the event to be monitored and the sampling duration. On each overflow in the CPMC*SEL, hardware snapshots the program counter along with event counts and writes into memory pointed by LDBAR. LDBAR has bits to indicate whether hardware is configured for accumulation or trace mode.
Currently the event monitored for trace-mode is fixed as cycle.

Trace-IMC Implementation:
--------------------------
To enable trace-imc, we need to

* Add trace node in the DTS file for power9, so that the new trace node can be discovered by the kernel.

Information included in the DTS file are as follows, (a snippet from the ima-catalog)

TRACE_IMC: trace-events {                                                  
     #address-cells = <0x1>;                                        
     #size-cells = <0x1>;                                           
     event at 10200000 {                                               
	 event-name = "cycles" ;                                    
	 reg = <0x10200000 0x8>;                                    
	 desc = "Reference cycles" ;                                
     };                                                             
 };                                                                 
 trace@0 {                                                          
	 compatible = "ibm,imc-counters";                           
	 events-prefix = "trace_";                                  
	 reg = <0x0 0x8>;                                           
	 events = < &TRACE_IMC >;                                   
	 type = <0x2>;                                              
	 size = <0x40000>;                                          

};

OP-BUILD changes needed to include the "trace node" is already pulled in to the ima-catalog repo.

ps://github.com/open-power/op-build/commit/d3e75dc26d1283d7d5eb444bff1ec9e40d5dfc07

* Enchance the opal_imc_counters_* calls to support this new trace mode in imc. Add support to initialize the trace-mode scom.

TRACE_IMC_SCOM bit representation:

0:1     : SAMPSEL                                                          
2:33    : CPMC_LOAD                                                        
34:40   : CPMC1SEL                                                         
41:47   : CPMC2SEL                                                         
48:50   : BUFFERSIZE                                                       
51:63   : RESERVED                                                         

CPMC_LOAD contains the sampling duration. SAMPSEL and CPMC*SEL determines the event to count. BUFFRSIZE indicates the memory range. On each overflow, hardware snapshots program counter along with event counts and update the memory and reloads the CMPC_LOAD value for the next sampling duration. IMC hardware does not support exceptions, so it quietly wraps around if memory buffer reaches the end.

OPAL support for IMC trace mode is already upstream.

* Set LDBAR spr to enable imc-trace mode.

LDBAR Layout:

0 : Enable/Disable
1 : 0 -> Accumulation Mode

          1 -> Trace Mode                                                    
  2:3   : Reserved                                                           
  4-6   : PB scope                                                           
  7     : Reserved                                                           
  8:50  : Counter Address                                                    

51:63 : Reserved

----------------------

PMI interrupt handling is avoided, since IMC trace mode snapshots the program counter and update to the memory. And this also provide a way for the operating system to do instruction sampling in real time without PMI(Performance Monitoring Interrupts) processing overhead. Performance data using 'perf top' with and without trace-imc event:

PMI interrupts count when perf top command is executed without trace-imc event.

# cat /proc/interrupts  (a snippet from the output)                        
9944      1072        804        804       1644        804       1306      
804        804        804        804        804        804        804      
804        804       1961       1602        804        804       1258      
[-----------------------------------------------------------------]        
803        803        803        803        803        803        803      
803        803        803        803        804        804        804     
804        804        804        804        804        804        803     
803        803        803        803        803       1306        803     
803   Performance monitoring interrupts                                   

perf top with trace-imc (executed right after 'perf top' without trace-imc event):

# perf top -e trace_imc/trace_cycles/                                      
12.50%  [kernel]          [k] arch_cpu_idle                            
11.81%  [kernel]          [k] __next_timer_interrupt                   
11.22%  [kernel]          [k] rcu_idle_enter                           
10.25%  [kernel]          [k] find_next_bit                            
 7.91%  [kernel]          [k] do_idle                                  
 7.69%  [kernel]          [k] rcu_dynticks_eqs_exit                    
 5.20%  [kernel]          [k] tick_nohz_idle_stop_tick                 
     [-----------------------]                                      
# cat /proc/interrupts (a snippet from the output)                         
9944      1072        804        804       1644        804       1306      
804        804        804        804        804        804        804      
804        804       1961       1602        804        804       1258      
[-----------------------------------------------------------------]        
803        803        803        803        803        803        803      
803        803        803        804        804        804        804
804        804        804        804        804        804        803     
803        803        803        803        803       1306        803     

803 Performance monitoring interrupts

The PMI interrupts count remains the same.

Changelog:
----------
From v3 -> v4:

* trace_imc_refc is introduced. So that even if, core-imc is disabled, trace-imc can be used.

* trace_imc_pmu_sched_task is removed and opal start/stop is invoked in trace_imc_event_add/del function.

Suggestions/comments are welcome.

Anju T Sudhakar (4):
powerpc/include: Add data structures and macros for IMC trace mode powerpc/perf: Rearrange setting of ldbar for thread-imc powerpc/perf: Trace imc events detection and cpuhotplug powerpc/perf: Trace imc PMU functions

Madhavan Srinivasan (1):
powerpc/perf: Add privileged access check for thread_imc

 arch/powerpc/include/asm/imc-pmu.h        |  39 +++                       
 arch/powerpc/include/asm/opal-api.h       |   1 +                         
 arch/powerpc/perf/imc-pmu.c               | 340 +++++++++++++++++++++-    
 arch/powerpc/platforms/powernv/opal-imc.c |   3 +                         
 include/linux/cpuhotplug.h                |   1 +                         
 5 files changed, 372 insertions(+), 12 deletions(-)  
Signature · 1 line
2.17.2