Makefile: move MTD-related lines in coherent Makefiles
Boris Brezillon u-boot 2 versions – New
Get series with b4
b4 am 20181205094410.54e73d40@bbrezillon
Patches in v3 No applies recorded yet
Reviews trailers per patch
16 of 29 patches have a Reviewed-by or Acked-by.
| Patch | Boris Brezillon |
| 1/28Makefile: move MTD-related lines in coherent Makefiles | |
| 2/28mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND | R-b |
| 3/28mtd: rename CONFIG_MTD -> CONFIG_DM_MTD | R-b |
| 4/28mtd: rename CONFIG_MTD_DEVICE -> CONFIG_MTD | R-b |
| 5/28mtd: ensure MTD is compiled when there is a NOR flash | R-b |
| 6/28mtd: ensure MTD/the raw NAND core are compiled when there is a NAND flash | R-b |
| 7/28mtd: ensure MTD is compiled when there is a SPI NOR flash using MTD | R-b |
| 8/28mtd: ensure UBI is compiled when using fastmap | R-b |
| 9/28mtd: ensure MTD is compiled when UBI is used | R-b |
| 10/28mtd: ensure UBI is compiled when CMD_UBI is selected | R-b |
| 11/28mtd: ensure UBI is compiled when ENV_IS_IN_UBI is selected | R-b |
| 12/28mtd: ensure MTD_RAW_NAND is compiled when ENV_IS_IN_NAND is selected | R-b |
| 13/28mtd: ensure MTD is compiled when ENV_IS_IN_FLASH is selected | |
| 13/28mtd: ensure MTD is compiled when ENV_IS_IN_FLASH is selected | |
| 14/28mtd: ensure CMD_NAND is compiled when its options are selected | R-b |
| 15/28mtd: ensure MTD is compiled when CMD_MTDPARTS is selected | R-b |
| 16/28configs: move CONFIG_MTD in defconfigs when set in arch includes | R-b |
| 17/28configs: remove raw NAND core from k2g defconfigs | |
| 18/28configs: remove MTD support from bcm11130 and M54418TWR defconfigs | |
| 19/28mtd: nand: add includes in NAND core to avoid warnings | R-b |
| 20/28dfu: add dependency on the NAND core | R-b |
| 21/28mtd: nor: NOR flashes depend on MTD | |
| 22/28mtd: nand: remove dependency on commands in Kconfig | |
| 23/28mtd: ubi: remove dependency on command in Kconfig | |
| 24/28cmd: mtdparts: show Kconfig options only if the command is selected | |
| 25/28cmd: nand/sf: isolate legacy code | |
| 26/28cmd: make MTD commands depend on MTD | |
| 26/28cmd: make MTD commands depend on MTD | |
| 28/28mtd: properly handle SPL kbuild lines | |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Read the v3 thread →