Skip to content

iio: adc: npcm: add NPCm ADC driver

Tomer Maimon linux-devicetree linux-iio lkml openbmc 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 5 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2dt-binding: iio: add NPCM ADC documentationDocumentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt+35 -03 replies
2/2iio: adc: add NPCM ADC driverdrivers/iio/adc/Kconfig drivers/iio/adc/Makefile drivers/iio/adc/npcm_adc.c+347 -02 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH v1 0/2] iio: adc: npcm: add NPCm ADC driver

This patch set adds Analog-to-Digital Converter (ADC) support for the Nuvoton NPCM Baseboard Management Controller (BMC).

The NPCM ADC is a 10-bit converter for eight channel inputs.

The NPCM ADC driver tested on NPCM750 evaluation board.

Tomer Maimon (2):
dt-binding: iio: add NPCM ADC documentation
iio: adc: add NPCM ADC driver

 .../bindings/iio/adc/nuvoton,npcm-adc.txt          |  35 +++
 drivers/iio/adc/Kconfig                            |  10 +
 drivers/iio/adc/Makefile                           |   1 +
 drivers/iio/adc/npcm_adc.c                         | 336 +++++++++++++++++++++
 4 files changed, 382 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt
 create mode 100644 drivers/iio/adc/npcm_adc.c
Signature · 1 line
2.14.1