Skip to content

net: Add support for Qualcomm ethqos

Vinod Koul linux-arm-msm linux-devicetree netdev 3 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest5 patches 7 repliesIn review
  2. v25 patches 6 repliesSuperseded
  3. v17 patches 9 repliesSuperseded

Changes in v3 from the cover letter

- Add description in DT and rename the file and compatible as suggested by Rob
- Update changelog for QCA8K driver
- Update AT803x phy disable delay for all RGMxx modes

Patches in v3 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5dt-bindings: net: Add Qualcomm ethqos bindingDocumentation/devicetree/bindings/net/qcom,ethqos.txt+64 -01 reply
2/5net: stmmac: Add driver for Qualcomm ethqosdrivers/net/ethernet/stmicro/stmmac/Kconfig drivers/net/ethernet/stmicro/stmmac/Makefile drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c+556 -00 replies
3/5MAINTAINER: Add entry for Qualcomm ETHQOS ethernet driverMAINTAINERS+8 -00 replies
4/5net: phy: at803x: Disable phy delay for RGMII modedrivers/net/phy/at803x.c+12 -105 replies
5/5net: dsa: qca8k: disable delay for RGMII modedrivers/net/dsa/qca8k.c+4 -120 replies

Reviews trailers per patch

1 of 5 patches has a Reviewed-by or Acked-by.

PatchRob Herring
1/5R-b
2/5
3/5
4/5
5/5

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v3 thread

Cover letter [PATCH v3 0/5] net: Add support for Qualcomm ethqos

Some Qualcomm SoCs sport a ethqos controller which use DW ip, so add the glue driver which uses stmmac driver along with DT bindings for this device.

This controller supports rgmii mode and doesn't work with existing phy drivers as they do not remove the phy delay delay in this mode, so fix the two phy drivers tested with this.

Changes in v3:
- Add description in DT and rename the file and compatible as suggested by Rob
- Update changelog for QCA8K driver
- Update AT803x phy disable delay for all RGMxx modes

Changes in v2:
- Fix the example in dt-binding
- Remove DT property for disable the delay and disable delay for RGMII mode in AT803x and QCA8K PHY drivers

Vinod Koul (5):
dt-bindings: net: Add Qualcomm ethqos binding
net: stmmac: Add driver for Qualcomm ethqos
MAINTAINER: Add entry for Qualcomm ETHQOS ethernet driver
net: phy: at803x: Disable phy delay for RGMII mode
net: dsa: qca8k: disable delay for RGMII mode

 .../devicetree/bindings/net/qcom,ethqos.txt   |  64 ++
 MAINTAINERS                                   |   8 +
 drivers/net/dsa/qca8k.c                       |  16 +-
 drivers/net/ethernet/stmicro/stmmac/Kconfig   |  10 +
 drivers/net/ethernet/stmicro/stmmac/Makefile  |   1 +
 .../stmicro/stmmac/dwmac-qcom-ethqos.c        | 545 ++++++++++++++++++
 drivers/net/phy/at803x.c                      |  22 +-
 7 files changed, 644 insertions(+), 22 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/qcom,ethqos.txt
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
Signature · 1 line
2.20.1