gpio: add support for pull-up/pull-down configuration
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v2 Latest5 patches 6 repliesIn review
- v14 patches 11 repliesSuperseded
Changes in v2 from the cover letter
- Add a comment in the binding that explicitly states that the new bit 4 and 5 should only be used for HW with a simple on/off pull-up/pull-down configuration. More complex HW should use a pin control binding. Suggested by Linus Walleij.
- Change gpiod_set_debounce() and gpiod_set_transitory() to use the new gpio_set_config() helper. This is done in a new, separate patch. Suggested by Linus Walleij.
- Add error checking in gpiod_configure_flags() to make sure pull-up and pull-down are not both enabled on the same GPIO. Suggested by Jan Kundrát. Jan suggested to put this in the code converting from DT properties to internal flags, but it actually makes more sense to do it in gpiod_configure_flags(), independently from DT parsing.
- Add a check in gpio-pca953x driver that pull-up/pull-down is indeed supported by the underlying HW in the pca953x_gpio_set_pull_up_down() function. Noticed by Linus Walleij.
- Move the changes in include/dt-bindings/gpio/gpio.h to the dt-bindings patch, as suggested by Rob Herring.
Patches in v2 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/5 | dt-bindings: gpio: document the new pull-up/pull-down flagsDocumentation/ include/ | +18 | 0 replies | |
| 2/5 | gpio: rename gpio_set_drive_single_ended() to gpio_set_config()drivers/ | +14 | 0 replies | |
| 3/5 | gpio: use new gpio_set_config() helper in more placesdrivers/ | +2 | 5 replies | |
| 4/5 | gpio: add core support for pull-up/pull-down configurationdrivers/ drivers/ drivers/ +2 more | +29 | 0 replies | |
| 5/5 | gpio: pca953x: add ->set_config implementationdrivers/ | +64 | 0 replies |
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.
Cover letter [PATCH v2 0/5] gpio: add support for pull-up/pull-down configuration
Hello,
As we started discussing in [1], it would be useful to have a way to configure pull-up/pull-down resistors for simple GPIO controllers that don't have any pinmuxing capability, and therefore no interaction with the pinctrl subsystem.
This is a second iteration of the patches (the v1 was posted at
https://patchwork.ozlabs.org/cover/1020392/).
Changes since v1:
- Add a comment in the binding that explicitly states that the new bit 4 and 5 should only be used for HW with a simple on/off pull-up/pull-down configuration. More complex HW should use a pin control binding. Suggested by Linus Walleij.
- Change gpiod_set_debounce() and gpiod_set_transitory() to use the new gpio_set_config() helper. This is done in a new, separate patch. Suggested by Linus Walleij.
- Add error checking in gpiod_configure_flags() to make sure pull-up and pull-down are not both enabled on the same GPIO. Suggested by Jan Kundrát. Jan suggested to put this in the code converting from DT properties to internal flags, but it actually makes more sense to do it in gpiod_configure_flags(), independently from DT parsing.
- Add a check in gpio-pca953x driver that pull-up/pull-down is indeed supported by the underlying HW in the pca953x_gpio_set_pull_up_down() function. Noticed by Linus Walleij.
- Move the changes in include/dt-bindings/gpio/gpio.h to the dt-bindings patch, as suggested by Rob Herring.
Rob: due to the changes in the dt-bindings patch, I have not kept your Acked-by.
Thomas
[1] https://marc.info/?l=linux-gpio&m=154491873506701&w=2
Thomas Petazzoni (5):
dt-bindings: gpio: document the new pull-up/pull-down flags
gpio: rename gpio_set_drive_single_ended() to gpio_set_config()
gpio: use new gpio_set_config() helper in more places
gpio: add core support for pull-up/pull-down configuration
gpio: pca953x: add ->set_config implementation
.../devicetree/bindings/gpio/gpio.txt | 12 ++++ drivers/gpio/gpio-pca953x.c | 66 ++++++++++++++++++- drivers/gpio/gpiolib-of.c | 5 ++ drivers/gpio/gpiolib.c | 50 +++++++++----- drivers/gpio/gpiolib.h | 2 + include/dt-bindings/gpio/gpio.h | 6 ++ include/linux/gpio/machine.h | 2 + include/linux/of_gpio.h | 2 + 8 files changed, 127 insertions(+), 18 deletions(-)
Signature · 1 line
2.20.1