Skip to content

net: phy: Add support for 2.5GBASET PHYs

Maxime Chevallier linux-arm-kernel lkml netdev 2 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest10 patches 16 repliesIn review
  2. v17 patches 14 repliesSuperseded

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/10net: phy: Update PHY linkmodes after config_initdrivers/net/phy/phy_device.c+58 -314 replies
2/10net: phy: Mask-out non-compatible modes when setting the max-speeddrivers/net/phy/phy-core.c drivers/net/phy/phy_device.c include/linux/phy.h+46 -531 reply
3/10net: phy: Move of_set_phy_eee_broken to phy-core.cdrivers/net/phy/phy-core.c drivers/net/phy/phy_device.c include/linux/phy.h+28 -281 reply
4/10net: phy: Automatically fill the generic TP, FIBRE and Backplane modesdrivers/net/phy/phy_device.c include/linux/linkmode.h+72 -12 replies
5/10net: phy: Extract genphy_c45_pma_read_abilities from marvell10gdrivers/net/phy/marvell10g.c drivers/net/phy/phy-c45.c include/linux/phy.h+83 -700 replies
6/10net: phy: Add generic support for 2.5GBaseT and 5GBaseTdrivers/net/phy/phy-c45.c drivers/net/phy/phy_device.c include/uapi/linux/mdio.h+55 -00 replies
7/10net: phy: marvell10g: Add support for 2.5GBASETdrivers/net/phy/marvell10g.c include/linux/marvell_phy.h+23 -83 replies
8/10net: phy: marvell10g: Force reading of 2.5/5Gdrivers/net/phy/marvell10g.c+31 -00 replies
9/10net: mvpp2: Add 2.5GBaseT supportdrivers/net/ethernet/marvell/mvpp2/mvpp2_main.c+1 -01 reply
10/10net: phy: marvell10g: add support for the 88x2110 PHYdrivers/net/phy/marvell10g.c include/linux/marvell_phy.h+14 -00 replies

Reviews trailers per patch

3 of 10 patches have a Reviewed-by or Acked-by.

PatchAndrew Lunn
1/10
2/10R-b
3/10R-b
4/10
5/10
6/10
7/10
8/10
9/10R-b
10/10

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH net-next v2 00/10] net: phy: Add support for 2.5GBASET PHYs

Hello everyone,

This is the second iteration of the series introducing support for 2.5GBASET and 5GBASET to the network PHY infrastructure.

These 2 modes are described in the 802.3bz specifications, and allow to use 2.5G and 5G speeds on cat5e/cat6 cables.

The required infrastructure code is added for 2.5GBASET and 5GBASET, but only 2.5GBASET support is added to the Marvell10G driver. The reason is because the 5GBASER interface mode used to communicate with the MAC isn't implemented yet, and therefore this can't be tested.

This series has seen some rework since last time, see the full details in the patches changelog. The main highlights are :

- Patch 1 moves the Pause ans Asym_Pause parameters update after calling config_init. This allows us to change the phydev->supported modes in config_init, while still forcing some quirks taken from phydrv->features, to disable unsupported Pause modes. This was proposed by Andrew.

- Patch 2 generalizes the way we mask-out modes we don't want to use when forcing the link speed through DT or ethtool, by walking through the PHY settings table, as proposed by Russell.

- Patch 4 implements automatic setting of TM, FIBRE and Backplane bits from the list of supported linkmodes.

- In Patch 5, we only read abilities from the PMA. Pause parameters aren't built from the genphy_c45_pma_read_abilities, as it was done in the previous iteration of the patch. We also amke use of linkmode_mod_bit to make sure we mask-out unsupported modes.

- In Patch 8, we manually check for the PMA device id to see if we have to use a quirk when reading the 2.5G/5G Extended Abilities

Maxime Chevallier (10):
net: phy: Update PHY linkmodes after config_init
net: phy: Mask-out non-compatible modes when setting the max-speed
net: phy: Move of_set_phy_eee_broken to phy-core.c
net: phy: Automatically fill the generic TP, FIBRE and Backplane modes
net: phy: Extract genphy_c45_pma_read_abilities from marvell10g
net: phy: Add generic support for 2.5GBaseT and 5GBaseT
net: phy: marvell10g: Add support for 2.5GBASET
net: phy: marvell10g: Force reading of 2.5/5G
net: mvpp2: Add 2.5GBaseT support
net: phy: marvell10g: add support for the 88x2110 PHY

 .../net/ethernet/marvell/mvpp2/mvpp2_main.c   |   1 +
 drivers/net/phy/marvell10g.c                  | 142 +++++------
 drivers/net/phy/phy-c45.c                     | 111 ++++++++
 drivers/net/phy/phy-core.c                    |  72 ++++++
 drivers/net/phy/phy_device.c                  | 237 +++++++++---------
 include/linux/linkmode.h                      |   6 +
 include/linux/marvell_phy.h                   |   2 +
 include/linux/phy.h                           |   3 +
 include/uapi/linux/mdio.h                     |  16 ++
 9 files changed, 405 insertions(+), 185 deletions(-)
Signature · 1 line
2.19.2