Skip to content

Adding DTS to support STMPE811 ADC on Toradex Boards

Philippe Schenker linux-arm-kernel linux-devicetree linux-tegra lkml 1 version Applied

Status from this message: Applied both, thanks.

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 5 repliesApplied

Patches in v1 Applied

#Subject and filesSizeRepliesApplied
1/2ARM: dts: Add stmpe-adc DT node to Toradex iMX6 modulesarch/arm/boot/dts/imx6qdl-apalis.dtsi arch/arm/boot/dts/imx6qdl-colibri.dtsi+28 -161 reply
2/2ARM: dts: Add stmpe-adc DT node to Toradex T30 modulesarch/arm/boot/dts/tegra30-apalis-v1.1.dtsi arch/arm/boot/dts/tegra30-apalis.dtsi arch/arm/boot/dts/tegra30-colibri.dtsi+42 -241 reply

Reviews trailers per patch

All 2 patches have a Reviewed-by or Acked-by.

PatchStefan Agner
1/2R-b
2/2R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/2] Adding DTS to support STMPE811 ADC on Toradex Boards

From: Philippe Schenker <[email protected]>

Hello,

Recently the STMPE811 driver got pulled by MFD (for 5.1). This patches I'm sending are now adding support for STMPE811 ADC in devicetree. These patches have been in the STMPE811 ADC driver patchset but were not pulled by Lee, as they had no reviews and I also corrected some minor comment errors.

Philippe Schenker (2):
ARM: dts: Add stmpe-adc DT node to Toradex iMX6 modules
ARM: dts: Add stmpe-adc DT node to Toradex T30 modules

 arch/arm/boot/dts/imx6qdl-apalis.dtsi      | 22 ++++++++++++++--------
 arch/arm/boot/dts/imx6qdl-colibri.dtsi     | 22 ++++++++++++++--------
 arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi | 22 ++++++++++++++--------
 arch/arm/boot/dts/tegra30-apalis.dtsi      | 22 ++++++++++++++--------
 arch/arm/boot/dts/tegra30-colibri.dtsi     | 22 ++++++++++++++--------
 5 files changed, 70 insertions(+), 40 deletions(-)
Signature · 1 line
2.20.1