SMSC USB333x ULPI USB PHY Support
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest3 patches 2 repliesIn review
Patches in v1 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/3 | dt-bindings: phy: Add bindings for the SMSC USB333x ULPI USB PHYDocumentation/ | +50 | 2 replies | |
| 2/3 | phy: Add support for the SMSC USB333x ULPI USB PHYdrivers/ drivers/ drivers/ +2 more | +316 | 0 replies | |
| 3/3 | MAINTAINERS: Add entry for the SMSC USB333x ULPI USB PHYMAINTAINERS | +6 | 0 replies |
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH 0/3] SMSC USB333x ULPI USB PHY Support
This series adds support for the SMSC USB333x ULPI USB PHY.
The USB333x usually does not require particular configuration as it implements generic registers described in the ULPI specification.
However, specific use cases require tweaking some bits. In our case, VBUS is not connected to anything so the internal EXTVBUS signal has to be routed to assert VbusValid.
Paul Kocialkowski (3):
dt-bindings: phy: Add bindings for the SMSC USB333x ULPI USB PHY
phy: Add support for the SMSC USB333x ULPI USB PHY
MAINTAINERS: Add entry for the SMSC USB333x ULPI USB PHY
.../devicetree/bindings/phy/smsc-usb333x.txt | 50 +++ MAINTAINERS | 6 + drivers/phy/Kconfig | 1 + drivers/phy/Makefile | 1 + drivers/phy/smsc/Kconfig | 11 + drivers/phy/smsc/Makefile | 2 + drivers/phy/smsc/phy-usb333x.c | 301 ++++++++++++++++++ 7 files changed, 372 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/smsc-usb333x.txt create mode 100644 drivers/phy/smsc/Kconfig create mode 100644 drivers/phy/smsc/Makefile create mode 100644 drivers/phy/smsc/phy-usb333x.c
Signature · 1 line
2.20.1