Skip to content

apalis imx6 fixes, device tree enablement and driver model conversion

Marcel Ziswiler u-boot 2 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest23 patches 0 repliesNew
  2. v123 patches 0 repliesSuperseded

Changes in v2 from the cover letter

- Remove spurious mentioning of DFU MMC both in subject as well as description.
- Use GPL-2.0+ OR X11 instead of GPL-2.0 OR MIT to be more consistent with all our other device trees.
- Further comments and white-space clean-up.
- Also add SION bit for Apalis, backlight, eMMC reset and Ethernet PHY reset GPIOs.
- Also request MMC/SD CD and USB power GPIOs.
- Clean-up and re-order includes.
- White-space clean-up.
- Also update copyright year in PMIC header file.
- And drop compiler.h include.
- Remove Colibri iMX6 change which inadvertently slipped in here.
- Also fix device tree naming for MMC DFU.

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/23apalis_imx6: get rid of obsolete nospl configurationsboard/toradex/apalis_imx6/1066mhz_4x128mx16.cfg board/toradex/apalis_imx6/1066mhz_4x256mx16.cfg board/toradex/apalis_imx6/MAINTAINERS +5 more+0 -3961 reply
2/23apalis_imx6: use distro defaultsconfigs/apalis_imx6_defconfig+1 -111 reply
3/23apalis_imx6: move console in env from header file to defconfigconfigs/apalis_imx6_defconfig include/configs/apalis_imx6.h+2 -31 reply
4/23apalis_imx6: enable fit image, gpt, imx thermal, efi loader supportconfigs/apalis_imx6_defconfig+3 -12 replies
5/23apalis_imx6: remove obsolete USB_GADGET_MASS_STORAGE configurationinclude/configs/apalis_imx6.h+0 -22 replies
6/23apalis_imx6: migrate to using device treearch/arm/dts/imx6-apalis.dts board/toradex/apalis_imx6/MAINTAINERS configs/apalis_imx6_defconfig+734 -11 reply
7/23apalis_imx6: clean-up and migrate gpios to using driver modelboard/toradex/apalis_imx6/apalis_imx6.c configs/apalis_imx6_defconfig+53 -381 reply
8/23apalis_imx6: enable pin control driverconfigs/apalis_imx6_defconfig+2 -01 reply
9/23apalis_imx6: migrate i2c to using driver modelboard/toradex/apalis_imx6/apalis_imx6.c board/toradex/apalis_imx6/pf0100.c board/toradex/apalis_imx6/pf0100.h +2 more+36 -1221 reply
10/23apalis_imx6: migrate pmic and regulator to using driver modelconfigs/apalis_imx6_defconfig+7 -01 reply
11/23apalis_imx6: migrate mmc and sata to using driver modelboard/toradex/apalis_imx6/apalis_imx6.c configs/apalis_imx6_defconfig include/configs/apalis_imx6.h+61 -434 replies
12/23apalis_imx6: migrate usb to using driver modelboard/toradex/apalis_imx6/apalis_imx6.c configs/apalis_imx6_defconfig+1 -221 reply
13/23apalis_imx6: drop CONFIG_OF_SYSTEM_SETUPboard/toradex/apalis_imx6/apalis_imx6.c include/configs/apalis_imx6.h+0 -91 reply
14/23apalis_imx6: add distroboot supportinclude/configs/apalis_imx6.h+16 -141 reply
15/23apalis_imx6: use both sd/mmc interfaces for setsdupdateinclude/configs/apalis_imx6.h+4 -21 reply
16/23apalis_imx6: unify sd/mmc drive strength with linux kernel settingsboard/toradex/apalis_imx6/apalis_imx6.c+14 -101 reply
17/23apalis_imx6: pf0100: reorder and cleanup message printingboard/toradex/apalis_imx6/pf0100.c+56 -541 reply
18/23apalis_imx6: disable ri and dcd irq in uartsboard/toradex/apalis_imx6/apalis_imx6.c+9 -11 reply
19/23apalis_imx6: revert fuse value set in mfgr_fuseboard/toradex/apalis_imx6/do_fuse.c+1 -11 reply
20/23configs: apalis_imx6: Use ext4 file system by defaultinclude/configs/apalis_imx6.h+3 -31 reply
21/23apalis_imx6: use SDP if USB serial downloader has been usedboard/toradex/apalis_imx6/apalis_imx6.c+8 -01 reply
22/23apalis_imx6: switch to zimageinclude/configs/apalis_imx6.h+11 -111 reply
23/23board: apalis_imx6: check for and report ecc errors in fusesboard/toradex/apalis_imx6/pf0100.c board/toradex/apalis_imx6/pf0100.h+107 -11 reply

Reviews trailers per patch

12 of 23 patches have a Reviewed-by or Acked-by.

PatchMarcel ZiswilerMax KrummenacherStefan AgnerIgor Opaniuk
1/23
2/23
3/23
4/23
5/23R-b
6/23
7/23
8/23
9/23
10/23
11/23
12/23
13/23A-b
14/23A-b A-b
15/23A-b
16/23A-b
17/23A-b
18/23A-b
19/23A-b A-b
20/23A-b A-b
21/23A-b
22/23A-b
23/23A-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 4 reviewers.

Read the v2 thread

Cover letter [U-Boot] [PATCH v2 00/23] apalis imx6 fixes, device tree enablement and driver model conversion

This series addresses some shortcomings, enables/introduces device tree support and converts all except video to using the driver model. This is fully tested both running our latest downstream BSP as well as the mainline Linux kernel.

Changes in v2:
- Remove spurious mentioning of DFU MMC both in subject as well as description.
- Use GPL-2.0+ OR X11 instead of GPL-2.0 OR MIT to be more consistent with all our other device trees.
- Further comments and white-space clean-up.
- Also add SION bit for Apalis, backlight, eMMC reset and Ethernet PHY reset GPIOs.
- Also request MMC/SD CD and USB power GPIOs.
- Clean-up and re-order includes.
- White-space clean-up.
- Also update copyright year in PMIC header file.
- And drop compiler.h include.
- Remove Colibri iMX6 change which inadvertently slipped in here.
- Also fix device tree naming for MMC DFU.

Gerard Salvatella (1):
board: apalis_imx6: check for and report ecc errors in fuses

Marcel Ziswiler (16):
apalis_imx6: get rid of obsolete nospl configurations
apalis_imx6: use distro defaults
apalis_imx6: move console in env from header file to defconfig
apalis_imx6: enable fit image, gpt, imx thermal, efi loader support
apalis_imx6: remove obsolete USB_GADGET_MASS_STORAGE configuration
apalis_imx6: migrate to using device tree
apalis_imx6: clean-up and migrate gpios to using driver model
apalis_imx6: enable pin control driver
apalis_imx6: migrate i2c to using driver model
apalis_imx6: migrate pmic and regulator to using driver model
apalis_imx6: migrate mmc and sata to using driver model
apalis_imx6: migrate usb to using driver model
apalis_imx6: drop CONFIG_OF_SYSTEM_SETUP
apalis_imx6: add distroboot support
apalis_imx6: pf0100: reorder and cleanup message printing
apalis_imx6: switch to zimage

Max Krummenacher (4):
apalis_imx6: use both sd/mmc interfaces for setsdupdate
apalis_imx6: unify sd/mmc drive strength with linux kernel settings
apalis_imx6: disable ri and dcd irq in uarts
apalis_imx6: revert fuse value set in mfgr_fuse

Sanchayan Maity (1):
configs: apalis_imx6: Use ext4 file system by default

Stefan Agner (1):
apalis_imx6: use SDP if USB serial downloader has been used

 arch/arm/dts/imx6-apalis.dts                  | 730 ++++++++++++++++++
 .../toradex/apalis_imx6/1066mhz_4x128mx16.cfg |  47 --
 .../toradex/apalis_imx6/1066mhz_4x256mx16.cfg |  47 --
 board/toradex/apalis_imx6/MAINTAINERS         |   4 +-
 board/toradex/apalis_imx6/apalis_imx6.c       | 341 ++++----
 board/toradex/apalis_imx6/apalis_imx6q.cfg    |  33 -
 board/toradex/apalis_imx6/clocks.cfg          |  41 -
 board/toradex/apalis_imx6/ddr-setup.cfg       |  96 ---
 board/toradex/apalis_imx6/do_fuse.c           |   2 +-
 board/toradex/apalis_imx6/pf0100.c            | 206 +++--
 board/toradex/apalis_imx6/pf0100.h            |  59 +-
 configs/apalis_imx6_defconfig                 |  35 +-
 configs/apalis_imx6_nospl_com_defconfig       |  65 --
 configs/apalis_imx6_nospl_it_defconfig        |  65 --
 include/configs/apalis_imx6.h                 |  83 +-
 15 files changed, 1119 insertions(+), 735 deletions(-)
 create mode 100644 arch/arm/dts/imx6-apalis.dts
 delete mode 100644 board/toradex/apalis_imx6/1066mhz_4x128mx16.cfg
 delete mode 100644 board/toradex/apalis_imx6/1066mhz_4x256mx16.cfg
 delete mode 100644 board/toradex/apalis_imx6/apalis_imx6q.cfg
 delete mode 100644 board/toradex/apalis_imx6/clocks.cfg
 delete mode 100644 board/toradex/apalis_imx6/ddr-setup.cfg
 delete mode 100644 configs/apalis_imx6_nospl_com_defconfig
 delete mode 100644 configs/apalis_imx6_nospl_it_defconfig
Signature · 1 line
2.20.1