Skip to content

Support 32-bit code generation for Armv8 targets

kostap at marvell.com buildroot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 3 patches 0 repliesNew

V2 changes from the cover letter

patch #1 (arm-gnu-rm-toolchain)
- Remove Config.in.host
- Remove custom extract command
- Set installation path to $(HOST_DIR)/opt//opt/gcc-arm-none-eabi
- Update commit message according to review notes
patch #2 (a3700-utils-marvell) - no changes
patch #3 (a3700 boot image build support)
- Update CROSS_CM3 path in arm-trusted-firmware to reflect patch #1 changes

Patches in v1 No applies recorded yet

None of the 3 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [Buildroot] [PATCH 0/3] Support 32-bit code generation for Armv8 targets

From: Konstantin Porotchkin <[email protected]>

This patch set adds support for building images for SoC that make usage of Armv8 application CPUs and Cortex-M/Cortex-R service CPUs. The application CPU cross-toolchain is unable to generate 32-bit THUMB code, therefore usage of secondary toolchain is needed.
The required pre-built toolchain is taken from ARM developers site and installed in host filesystem only.
The patch set makes use of dual toolchain for adding support for Marvell Armada 3700 SoC that uses both Cortex-A53 and Cortex-M3 CPUs for running system firmware.

V2 changes:
patch #1 (arm-gnu-rm-toolchain)
- Remove Config.in.host
- Remove custom extract command
- Set installation path to $(HOST_DIR)/opt//opt/gcc-arm-none-eabi
- Update commit message according to review notes
patch #2 (a3700-utils-marvell) - no changes
patch #3 (a3700 boot image build support)
- Update CROSS_CM3 path in arm-trusted-firmware to reflect patch #1 changes

Konstantin Porotchkin (3):
package: arm-gnu-rm-toolchain: Add ARM-RM toolchain
boot: a3700-utils-marvell: Add Armada-3700 utilities
boot: arm-trusted-firmware: add support for Marvell Armada 3700

 boot/Config.in                                |  1 +
 boot/a3700-utils-marvell/Config.in            | 46 +++++++++++++++++++
 .../a3700-utils-marvell.hash                  |  2 +
 .../a3700-utils-marvell.mk                    | 28 +++++++++++
 .../arm-trusted-firmware.mk                   |  7 +++
 package/Config.in.host                        |  1 +
 package/arm-gnu-rm-toolchain/Config.in.host   | 13 ++++++
 .../arm-gnu-rm-toolchain.hash                 |  2 +
 .../arm-gnu-rm-toolchain.mk                   | 22 +++++++++
 9 files changed, 122 insertions(+)
 create mode 100644 boot/a3700-utils-marvell/Config.in
 create mode 100644 boot/a3700-utils-marvell/a3700-utils-marvell.hash
 create mode 100644 boot/a3700-utils-marvell/a3700-utils-marvell.mk
 create mode 100644 package/arm-gnu-rm-toolchain/Config.in.host
 create mode 100644 package/arm-gnu-rm-toolchain/arm-gnu-rm-toolchain.hash
 create mode 100644 package/arm-gnu-rm-toolchain/arm-gnu-rm-toolchain.mk
Signature · 1 line
2.17.1