Skip to content

Add comphy support for Armada 38x

Russell King - ARM Linux admin linux-arm-kernel linux-devicetree netdev 2 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest0 of 6 patches 5 repliesIn review
  2. v10 of 6 patches 0 repliesSuperseded

Patches in v2 No applies recorded yet

None of the 6 patches the cover letter announces are in this archive.

Reviews trailers per patch

PatchRob HerringKishon Vijay Abraham I
SeriesR-b A-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH net-next v2 0/6] Add comphy support for Armada 38x

Hi,

This series adds support for the comphy for Armada 38x, which allows these SoCs to use 2500BASE-X mode with appropriate SFP modules.

Tested on SolidRun Clearfog after updating for the 5.0 merge window changes.

 .../bindings/net/marvell-armada-370-neta.txt       |   2 +-
 .../bindings/phy/phy-armada38x-comphy.txt          |  40 ++++
 arch/arm/boot/dts/armada-388-clearfog.dtsi         |   2 +
 arch/arm/boot/dts/armada-38x.dtsi                  |  37 ++++
 drivers/net/ethernet/marvell/mvneta.c              |  45 +++-
 drivers/phy/marvell/Kconfig                        |  10 +
 drivers/phy/marvell/Makefile                       |   1 +
 drivers/phy/marvell/phy-armada38x-comphy.c         | 237 +++++++++++++++++++++
 8 files changed, 369 insertions(+), 5 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt
 create mode 100644 drivers/phy/marvell/phy-armada38x-comphy.c
Signature · 3 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up