Skip to content

net: dsa: b53: VLAN and L2 fixes

Florian Fainelli netdev 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest5 patches 1 replyIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5net: dsa: b53: Fix default VLAN IDdrivers/net/dsa/b53/b53_common.c+16 -130 replies
2/5net: dsa: b53: Properly account for VLAN filteringdrivers/net/dsa/b53/b53_common.c drivers/net/dsa/b53/b53_priv.h+57 -50 replies
3/5net: systemport: Fix reception of BPDUsdrivers/net/ethernet/broadcom/bcmsysport.c+4 -00 replies
4/5net: dsa: bcm_sf2: Do not assume DSA master supports WoLdrivers/net/dsa/bcm_sf2.c+6 -40 replies
5/5net: dsa: b53: Do not program CPU port's PVIDdrivers/net/dsa/b53/b53_common.c+1 -10 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH net 0/5] net: dsa: b53: VLAN and L2 fixes

Hi David,

This patch series contains a collection of fixes to the b53 driver in order to:

- consistently program the same default VLAN ID when a port is bridged or not
- properly account for VLAN filtering being turned on/off and turning on ingress VID checking accordingly
- have SYSTEMPORT properly forward BPDU frames to the network stack (which it did not)
- do not assume that WoL is supported by the DSA master network device we are connected to

Thank you!

Florian Fainelli (5):
net: dsa: b53: Fix default VLAN ID
net: dsa: b53: Properly account for VLAN filtering
net: systemport: Fix reception of BPDUs
net: dsa: bcm_sf2: Do not assume DSA master supports WoL
net: dsa: b53: Do not program CPU port's PVID

 drivers/net/dsa/b53/b53_common.c           | 90 +++++++++++++++++-----
 drivers/net/dsa/b53/b53_priv.h             |  3 +
 drivers/net/dsa/bcm_sf2.c                  | 10 ++-
 drivers/net/ethernet/broadcom/bcmsysport.c |  4 +
 4 files changed, 84 insertions(+), 23 deletions(-)
Signature · 1 line
2.17.1