Skip to content

apalis_imx6: get rid of obsolete nospl configurations

sbabic at denx.de u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v2 Latest23 patches 0 repliesNew

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/23apalis_imx6: get rid of obsolete nospl configurations+0 -00 replies
2/23apalis_imx6: use distro defaults+0 -00 replies
3/23apalis_imx6: move console in env from header file to defconfig+0 -00 replies
4/23apalis_imx6: enable fit image, gpt, imx thermal, efi loader support+0 -00 replies
5/23apalis_imx6: remove obsolete USB_GADGET_MASS_STORAGE configuration+0 -00 replies
6/23apalis_imx6: migrate to using device tree+0 -00 replies
7/23apalis_imx6: clean-up and migrate gpios to using driver model+0 -00 replies
8/23apalis_imx6: enable pin control driver+0 -00 replies
9/23apalis_imx6: migrate i2c to using driver model+0 -00 replies
10/23apalis_imx6: migrate pmic and regulator to using driver model+0 -00 replies
11/23apalis_imx6: migrate mmc and sata to using driver model+0 -00 replies
12/23apalis_imx6: migrate usb to using driver model+0 -00 replies
13/23apalis_imx6: drop CONFIG_OF_SYSTEM_SETUP+0 -00 replies
14/23apalis_imx6: add distroboot support+0 -00 replies
15/23apalis_imx6: use both sd/mmc interfaces for setsdupdate+0 -00 replies
16/23apalis_imx6: unify sd/mmc drive strength with linux kernel settings+0 -00 replies
17/23apalis_imx6: pf0100: reorder and cleanup message printing+0 -00 replies
18/23apalis_imx6: disable ri and dcd irq in uarts+0 -00 replies
19/23apalis_imx6: revert fuse value set in mfgr_fuse+0 -00 replies
20/23configs: apalis_imx6: Use ext4 file system by default+0 -00 replies
21/23apalis_imx6: use SDP if USB serial downloader has been used+0 -00 replies
22/23apalis_imx6: switch to zimage+0 -00 replies
23/23board: apalis_imx6: check for and report ecc errors in fuses+0 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread