Skip to content

ARM: da850: enable cpufreq in DT mode

Bartosz Golaszewski linux-arm-kernel linux-devicetree lkml 6 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v5 Latest posting 2/25 patches 1 replyIn review
  2. v5 posting 1/25 patches 3 repliesSuperseded
  3. v45 patches 1 replySuperseded
Earlier versions · 3
VersionPostedPatchesRepliesStatus
v33 patches19 repliesSuperseded
v24 patches9 repliesSuperseded
v14 patches7 repliesSuperseded

Changes in v5 from the cover letter

- only enable a single OPP for da850-lcdk due to the problem with the OHCI controller becoming unresponsive after cpufreq transitions
- fix the name of the pmic on da850-evm

Patches in v5 posting 2/2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5ARM: dts: da850: add cpu node and operating points to DTarch/arm/boot/dts/da850.dtsi+50 -00 replies
2/5ARM: dts: da850-lego-ev3: enable cpufreqarch/arm/boot/dts/da850-lego-ev3.dts+30 -00 replies
3/5ARM: dts: da850-lcdk: enable cpufreqarch/arm/boot/dts/da850-lcdk.dts+36 -00 replies
4/5ARM: dts: da850-evm: enable cpufreqarch/arm/boot/dts/da850-evm.dts+13 -00 replies
5/5ARM: davinci_all_defconfig: Enable CPUFREQ_DTarch/arm/configs/davinci_all_defconfig+1 -00 replies

Reviews trailers per patch

1 of 5 patches has a Reviewed-by or Acked-by.

PatchAdam Ford
1/5
2/5
3/5
4/5R-b
5/5

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v5 thread

Cover letter [RESEND PATCH v5 0/5] ARM: da850: enable cpufreq in DT mode

From: Bartosz Golaszewski <[email protected]>

Note: resending rebased on top of v5.2-rc2

===

This series adds cpufreq-dt operating points for da850 boards supported with device tree (da850-lcdk, da850-lego-ev3, da850-evm).

Last patch enables CPUFREQ_DT in davinci_all_defconfig.

v1 -> v2:
- use the VDCDC3_1.2V regulator as cpu-supply on da850-evm

v2 -> v3:
- drop patch 1, as the revision tag is in fact correctly passed to the kernel by u-boot
- only enable the 375 operating point for da850-evm as this is the standard frequency for this board

v3 -> v4:
- split the first patch into three separate changesets: one adding the operating points to the main dtsi and two enabling cpufreq on da850-lego-ev3 and da850-lcdk
- remove the operating point not mentioned in the datasheet (415 MHz)
- fix commit message in patch 4/5

v4 -> v5:
- only enable a single OPP for da850-lcdk due to the problem with the OHCI controller becoming unresponsive after cpufreq transitions
- fix the name of the pmic on da850-evm

Bartosz Golaszewski (1):
ARM: dts: da850-evm: enable cpufreq

David Lechner (4):
ARM: dts: da850: add cpu node and operating points to DT
ARM: dts: da850-lego-ev3: enable cpufreq
ARM: dts: da850-lcdk: enable cpufreq
ARM: davinci_all_defconfig: Enable CPUFREQ_DT

 arch/arm/boot/dts/da850-evm.dts        | 13 +++++++
 arch/arm/boot/dts/da850-lcdk.dts       | 36 +++++++++++++++++++
 arch/arm/boot/dts/da850-lego-ev3.dts   | 30 ++++++++++++++++
 arch/arm/boot/dts/da850.dtsi           | 50 ++++++++++++++++++++++++++
 arch/arm/configs/davinci_all_defconfig |  1 +
 5 files changed, 130 insertions(+)
Signature · 1 line
2.21.0