Add bluetooth, gps and accelerometer to TBS A711
Status from this message: Applied, thanks!
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
Changes in v2 from the cover letter
- dropped already applied patches from the series (bluetooth, a83t uarts)
- added /omit-if-no-ref/ to "uart2-pb-pins"
- renamed node "bma250" to "accelerometer"
- removed pinctrl properties that are already in base dtsi (i2c1_pins)
Patches in v2 Applied
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/5 | ARM: dts: sun8i: tbs-a711: Add node for BMA250 accelerometerarch/ | +13 | 1 reply | |
| 2/5 | ARM: dts: sun8i: a83t: Add UART2 PB pinsarch/ | +6 | 1 reply | |
| 3/5 | gnss: Add u-blox,neo-6m compatibledrivers/ | +1 | 0 replies | |
| 4/5 | dt-bindings: gnss: Add u-blox,neo-6m compatibleDocumentation/ | +1 | 2 replies | |
| 5/5 | ARM: dts: sun8i: tbs-a711: Enable UART2 (for NEO-6M GPS module)arch/ | +21 | 2 replies |
Reviews trailers per patch
1 of 5 patches has a Reviewed-by or Acked-by.
| Patch | Rob Herring |
|---|---|
| 1/5 | |
| 2/5 | |
| 3/5 | |
| 4/5 | R-b |
| 5/5 |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH v2 0/5] Add bluetooth, gps and accelerometer to TBS A711
From: Ondrej Jirman <megous-5qf/[email protected]>
This series enables some peripherals on TBS A711 tablet that already have mainline drivers:
- GPS u-blox neo-6m (via gnss u-blox driver)
- Bluetooth (via recently added OF support in the Broadcom bluetooth driver)
- Accelermomter BMA-250 (hooked to the I2C bus)
It also modifies A83T DTSI and adds missing UART interfaces.
I've added additional compatible to the gnss/u-blox driver for NEO-6M, because this board uses this module, and I don't think I can use the existing compatible for u-blox,neo-m8, even as a fallback.
Please take a look, and apply the patches if you have no objections.
Many of the patches will go through the sunxi tree, but I'm not sure who will want to take the GPS patches.
regards,
Ondrej Jirman
Changes in v2:
- dropped already applied patches from the series (bluetooth, a83t uarts)
- added /omit-if-no-ref/ to "uart2-pb-pins"
- renamed node "bma250" to "accelerometer"
- removed pinctrl properties that are already in base dtsi (i2c1_pins)
Ondrej Jirman (5):
ARM: dts: sun8i: tbs-a711: Add node for BMA250 accelerometer
ARM: dts: sun8i: a83t: Add UART2 PB pins
gnss: Add u-blox,neo-6m compatible
dt-bindings: gnss: Add u-blox,neo-6m compatible
ARM: dts: sun8i: tbs-a711: Enable UART2 (for NEO-6M GPS module)
.../devicetree/bindings/gnss/u-blox.txt | 1 + arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 34 +++++++++++++++++++ arch/arm/boot/dts/sun8i-a83t.dtsi | 6 ++++ drivers/gnss/ubx.c | 1 + 4 files changed, 42 insertions(+)
Signature · 1 line
2.21.0