Skip to content

RFC Add support for applications of overlays in SPL

Lukasz Majewski u-boot 1 version New

Get series with b4
b4 am 20190327103937.3e8fbeb6@jawa

Versions newest first

  1. v1 RFC Latest0 of 9 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 9 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [RFC PATCH v1 0/9] Add support for applications of overlays in SPL

Hi Jean-Jacques,

Quoted 55 lines

The purpose of this series is to provide the SPL with ability to apply overlays for u-boot. this is only a RFC so far, to get a feedback on the approach.

Our use-case is the support of the daughter boards of the AM65x EVM. In Linux, each board is supported by a unique overlay. The presence of the boards is detected at runtime, and some useful features (like USB) are implemented on those daughter boards. Instead of providing multiple dtbs and fall in a combinatorial pit, we propose to use DT overlays.

The first 4 patches are small fixes/improvement related to the build. Patch #5 may be a bit controversial. It basically replaces u-boot.img with a symlink to u-boot.itb in case we use a "complex" FIT (ie: if SPL_FIT_SOURCE or SPL_FIT_GENERATOR are set)

Patch #6 and #7 are the core support for DTB application in the SPL. Based on a patch posted by Michal Simek a few weeks ago. The list of overlays is read from the "fdt" of the configuration chosen in the ITB (same property as for the DTB):

  configurations {
     default = "conf-1";
     conf-1 {
       description = "dra76-evm";
       firmware = "firmware-1";
       fdt = "fdt-1", "overlay-1";
      };

}

Patch #8 adds a way to dynamically select the DT overlays. That is were we would use HW detection to select the required overlays. In that case, the board-level code tells what overlay it needs (it gives the name of the node).

Patch #9 is not required, but demonstrates on a DRA76-evm how this series can be used.

Jean-Jacques Hiblot (8):
dtbo: also generate dtbo from dtso
Makefile.lib: include /__symbols__ in dtb if OF_LIBFDT_OVERLAY is
enabled
Makefile: Fix u-boot.itb generation when building outside the source
tree
Makefile: Pass the board name to the FIT generator scripts
Makefile: use custom ITS to build u-boot.img if SPL_FIT_SOURCE or
SPL_FIT_GENERATOR are set
spl: fit: Allow calling spl_load_fit_image() to only get the image
size
sp: fit: Allow the board to dynamically select the DTB overlays it
needs.
!!! TEMP !!! For demonstration only !!! DRA76: Usage of overlays in
SPL

Quoted 2 lines

Michal Simek (1):
spl: fit: Add support for applying DT overlay

Just out of curiosity - what is the difference in SPL footprint when with and without this feature?

Quoted 11 lines
 Makefile                                      |  20 ++-
 arch/arm/dts/Makefile                         |   2 +-
 arch/arm/dts/dra76-evm-dummy.dtso             |  14 +++
 arch/arm/dts/dra76-evm-dummy2.dtso            |  15 +++
 arch/arm/mach-imx/mkimage_fit_atf.sh          |   3 +-
 arch/arm/mach-rockchip/make_fit_atf.py        |   5 +-
 .../lion_rk3368/fit_spl_atf.its               |   6 +-
 .../puma_rk3399/fit_spl_atf.its               |   8 +-
 board/ti/dra7xx/evm.c                         |  30 +++++
 board/ti/dra7xx/evm.its                       |  48 ++++++++
Quoted 9 lines
 common/spl/spl_fit.c                          | 114
+++++++++++++++++- configs/dra7xx_evm_defconfig                  |
2 + include/spl.h                                 |  20 +++
 scripts/Makefile.lib                          |   7 ++
 14 files changed, 273 insertions(+), 21 deletions(-)
 create mode 100644 arch/arm/dts/dra76-evm-dummy.dtso
 create mode 100644 arch/arm/dts/dra76-evm-dummy2.dtso
 create mode 100644 board/ti/dra7xx/evm.its

Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de -------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190327/e20a8e97/attachment.sig>