Skip to content

clk: imx: Add i.MX6 CLK support

Lukasz Majewski u-boot 7 versions – New

Get series with b4
b4 am 20190423121054.52ed856b@jawa

Versions newest first · linked by author and title

  1. v2 Latest posting 7/70 of 10 patches 0 repliesNew
  2. v2 posting 6/70 of 10 patches 0 repliesSuperseded
  3. v2 posting 5/70 of 10 patches 0 repliesSuperseded
Earlier versions · 4
VersionPostedPatchesRepliesStatus
v2 posting 4/70 of 10 patches0 repliesSuperseded
v2 posting 3/71 of 10 patches0 repliesSuperseded
v2 posting 2/70 of 10 patches0 repliesSuperseded
v2 posting 1/70 of 10 patches0 repliesSuperseded

Patches in v2 posting 7/7 No applies recorded yet

None of the 10 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [U-Boot] [PATCH v2 00/10] clk: imx: Add i.MX6 CLK support

Hi Peng,

Quoted 331 lines
Quoted 304 lines

-----Original Message-----
From: Lukasz Majewski [mailto:lukma at denx.de]
Sent: 2019年4月23日 16:46
To: Peng Fan <[email protected]>
Cc: Jagan Teki <[email protected]>; Stefano Babic <[email protected]>; Fabio Estevam <[email protected]>; Simon Glass <[email protected]>; Tom Rini <[email protected]>; Marek Vasut <[email protected]>; Neil Armstrong <[email protected]>; Philipp Tomsich <[email protected]>; Maxime Ripard <[email protected]>; Michael Trimarchi <[email protected]>; Andre Przywara <[email protected]>; U-Boot-Denx <[email protected]>; linux-amarula at amarulasolutions.com; dl-uboot-imx <[email protected]>
Subject: Re: [U-Boot] [PATCH v2 00/10] clk: imx: Add i.MX6 CLK support

Quoted 8 lines · On Tue, 23 Apr 2019 07:47:38 +0000 Peng Fan <[email protected]> wrote:

Hi Lukasz,

Quoted 6 lines

-----Original Message-----
From: Lukasz Majewski [mailto:lukma at denx.de]
Sent: 2019年4月20日 6:18
To: Peng Fan <[email protected]>
Cc: Jagan Teki <[email protected]>; Stefano Babic <[email protected]>; Fabio Estevam <[email protected]>; Simon

Glass

Quoted 8 lines
Quoted 8 lines

<[email protected]>; Tom Rini <[email protected]>; Marek Vasut <[email protected]>; Neil Armstrong <[email protected]>; Philipp Tomsich <[email protected]>; Maxime Ripard <[email protected]>; Michael Trimarchi <[email protected]>; Andre Przywara <[email protected]>; U-Boot-Denx <[email protected]>; linux-amarula at amarulasolutions.com; dl-uboot-imx

<[email protected]>

Quoted 212 lines
Quoted 212 lines

Subject: Re: [U-Boot] [PATCH v2 00/10] clk: imx: Add i.MX6 CLK support

Quoted 196 lines · On Fri, 19 Apr 2019 08:52:28 +0000 Peng Fan <[email protected]> wrote:
Quoted 186 lines
Quoted 156 lines · On Fri, 19 Apr 2019 11:56:25 +0530 Jagan Teki <[email protected]>…
Quoted 154 lines · Lukasz Majewski

Hi Jagan,

Quoted 92 lines
Quoted 74 lines · Lukasz Majewski
Quoted 57 lines · On Thu, 4 Apr 2019 14:56:36 +0530 Jagan Teki <[email protected]> wrote:
Quoted 55 lines · Lukasz Majewski
Quoted 39 lines · On Tue, 2 Apr 2019 16:58:33 +0530 Jagan Teki <[email protected]>…

This is revised version of previous i.MX6
clock management [1].

The main difference between previous version
is
- Group the i.MX6 ccm clocks into gates and
tree instead of handling the clocks in simple
way using case statement.
- use gate clocks for enable/disable
management.
- use tree clocks for get/set rate or parent
traverse management.
- parent clock handling via clock type.
- traverse the parent clock using recursive
functionlaity.

The main motive behind this tree framework is
to make the clock tree management simple and
useful for U-Boot requirements instead of
garbing Linux clock management code.

We are trying to manage the Allwinner clocks
with similar kind, so having this would
really help i.MX6 as well.

Added simple names for clock macros, but will
update it in future version.

I have skipped ENET clocks from previous
series, will add it in future patches.

Changes for v2:
- changed framework patches.
- add support for imx6qdl and imx6ul boards
- add clock gates, tree.

[1] https://patchwork.ozlabs.org/cover/950964/

Any inputs?

Hmm.... It looks like we are doing some development in parallel.

Please look into following commit [1]:
https://patchwork.ozlabs.org/patch/1034051/

It ports from Linux 5.0 the CCF framework for iMX6Q, which IMHO in the long term is a better approach. The code is kept simple and resembles the code from Barebox.

Quoted 7 lines
Quoted 3 lines

Please correct me if I'm wrong, but the code from your work is not modeling muxes, gates and other components from Linux CCF.

The U-Boot implementation of CLK would require as minimal and simple as possible due to requirement of U-Boot itself. Hope you agree this point?

Now i.MX6 is using clock.c CLK implementation. If we decide to replace it - we shall do it in a way, which would allow us to follow Linux kernel. (the barebox implementation is a stripped CCF from Linux, the same is in patch [1]).

Quoted 8 lines
Quoted 3 lines

if yes having CCF stack code to handle all clock with respective separate drivers management is may not require as of now, IMHO.

I do have a gut feeling, that we will end up with the need to have the CCF framework ported anyway. As for example imx7/8 can re-use muxes, gates code.

As per my experience the main the over-ahead to handle clocks in U-Boot if we go with separate clock drivers is for Video and Ethernet peripherals. these are key IP's which use more clocks from U-Boot point-of-view, others can be handle pretty straight-forward unless if they don't have too much tree chain.

Quoted 5 lines

On this series, the tree management is already supported ENET in i.MX6, and Allwinner platforms.

As of now, I'm thinking I can handle reset of the clocks with similar way.

But this code also supports ENET and ESDHCI clocks on i.MX6Q (as supporting those was the motivator for this work).

One important thing to be aware of - the problem with SPL's footprint. The implementation with clock.c is small and simple, but doesn't scale well.

Quoted 9 lines
Quoted 6 lines

However, those are only my "feelings" after a glimpse look
- I will look into your code more thoroughly and provide feedback.

Please have a look, if possible check even the code size by adding USDHC clocks.

Yes, code size (especially in SPL) is an _important_ factor here.

Quoted 15 lines
Quoted 15 lines
Quoted 10 lines

This series is using recursive calls for handling parenting stuff to handle get or set rates, which is fine for handling clock tree management as far as U-Boot point-of-view. We have faced similar situation as I explained in commit message about Allwinner clocks [2] and we ended up going this way.

I'm not Allwinner expert - but if I may ask - how far away is this implementation from mainline Linux kernel?

Quoted 6 lines
Quoted 2 lines

How difficult is it to port the new code (or update it)?

Allwinner clocks also has similar gates, muxs, and with other platform stuff which has too much scope in Linux to use CCM.

For example the barebox managed to get subset of Linux CCF ported, without loosing the CCF similarity.

Important factors/requirements for the i.MX clock code:

1. Easy maintenance in long-term

2. Reusing the code in SPL (with a very important factor of _code_size_).

Quoted 6 lines
Quoted 3 lines

3. Reuse the code for other i.MX SoCs (imx7, imx8)

4. Effort needed to use DM with this code

I understand your points, I was managed this series based on these requirements as well.

Ok.

Could you share the delta of footprint size (u-boot.img/SPL) with and without your patch (on imx6q) ?

In my case the CCF caused increase of u-boot.img proper (as it was not yet adapted to SPL):

415KiB -> 421KiB = 6KiB increase of size (< 2%).

(This can be further reduced by using OF_PLATDATA).

This CCF code hasn't been ported to SPL (yet)

Quoted 2 lines

We even consider the foot-print, atleast for recursive calls of handling parenting scale well.

With CCF porting v3 I'm going to provide some caching, so the descending would be done at most once.

Quoted 6 lines
Quoted 3 lines

May be we can
consider to design based on this as per U-Boot.

Please look into point 1. Having code ported from Linux is IMHO better in the long term.

Agree.

Quoted 1 line
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines

Let me come-back with another series or do you have any inputs or questions, please post it.

I will post CCF port for imx6q v3 in a few days.

Looking forward your new patchset.
Working on enabling i.MX8MM CCF support.

Output of 'dm tree' on imx6q:

Quoted 11 lines
Quoted 11 lines
 clk          1  [   ]   fixed_rate_clock      |-- ckil
 clk          2  [   ]   fixed_rate_clock      |-- ckih1
 clk          3  [ + ]   fixed_rate_clock      `-- osc
 clk          4  [ + ]   imx_clk_pllv3             |-- pll2_bus
 clk          7  [   ]   imx_clk_pfd               |   |--

pll2_pfd0_352m
clk 8 [ + ] imx_clk_pfd | `--
pll2_pfd2_396m
clk 9 [ + ] imx_clk_mux | |--
usdhc1_sel
clk 13 [ + ] imx_clk_divider | |

`--

Quoted 6 lines
Quoted 6 lines

usdhc1_podf
clk 22 [ ] imx_clk_gate2 | |
`-- usdhc1
clk 10 [ + ] imx_clk_mux | |--
usdhc2_sel
clk 14 [ + ] imx_clk_divider | |

`--

Quoted 6 lines
Quoted 6 lines

usdhc2_podf
clk 23 [ ] imx_clk_gate2 | |
`-- usdhc2
clk 11 [ + ] imx_clk_mux | |--
usdhc3_sel
clk 15 [ + ] imx_clk_divider | |

`--

Quoted 6 lines
Quoted 6 lines

usdhc3_podf
clk 24 [ ] imx_clk_gate2 | |
`-- usdhc3
clk 12 [ + ] imx_clk_mux | `--
usdhc4_sel
clk 16 [ + ] imx_clk_divider |

`--

Quoted 8 lines
Quoted 8 lines

usdhc4_podf
clk 25 [ ] imx_clk_gate2 |
`-- usdhc4
clk 5 [ + ] imx_clk_pllv3 `--
pll3_usb_otg clk 6 [ + ]
imx_clk_fixed_factor `-- pll3_60m clk 17 [ +
] imx_clk_divider `-- ecspi_root
clk 18 [ ] imx_clk_gate2

|--

Quoted 2 lines
Quoted 2 lines

ecspi1
clk 19 [ ] imx_clk_gate2

|--

Quoted 2 lines
Quoted 2 lines

ecspi2
clk 20 [ ] imx_clk_gate2

|--

Quoted 2 lines
Quoted 2 lines

ecspi3
clk 21 [ ] imx_clk_gate2

`--

Quoted 3 lines
Quoted 2 lines

ecspi4

Quoted 6 lines
Quoted 1 line

Do you have a public tree/branch for CCF?

Please find the CCF devel work:
https://github.com/lmajewski/u-boot-dfu/commits/CCF-devel

The CCF starts from: c792297e1a47ead02ff2baa4f162de8782b29910

Thanks.

Quoted 18 lines

(below you will find imx6q DM/DTS conversion code).

What is added when compared to the original one:

- SPL support

- Some fixes for v2019.04+

What is on the TO DO list:

- OF_PLATDATA for SPL (as I did not used any optimisations yet).

Quoted 3 lines

I am adding imx8mm clk and
would like to base on your tree. I think need to extend clk_ops to support mux/divider, but not just get rate.

Quoted 6 lines
Quoted 1 line

Some mux/divider is provided (clk-mux.c / clk-divider.c)

After reading into details, there is no clk core logic. mux not support reparenting.
Divider not support rate setting.
no composite clk support.

I've stripped out the code, which I couldn't test/needed on imx6q.

This version only has the "must have" for imx6q (including SPL) with some generic code for clock framework in u-boot.

Quoted 3 lines

We could not directly reuse Linux vendor clk driver, need adapt to
U-Boot,

Yes, you would need to adapt the code (as it was done in barebox and this patch set).

Quoted 1 line

should not be hard from your code.

I wanted to keep the structure of the code untouched from Linux. However, for example, we can't afford in imx6q the clk[IMX6QDL_<clock_name>] table - it is simply too big for SPL.

Quoted 4 lines

When multiple devices sources from one PLL, one device might would like to set pll value that break other devices, there is no logic to protect if support freq changing.

Ok, so in your use-case you need the frequency re-calc code? (Which changes - updates - the clocks up in the tree when root PLL is changed) ?

No, it was not added.

Quoted 2 lines

Do you have plan work on the upper items?

For the imx6q use case - in which I need some muxing and gating only - I do not need to recalc/reparent the frequency.

The CCF porting patch only brought:

- the smallest subset of CCF functions for my use case

- directory (and source files) structure from Linux

- some clock uclass enhancement for u-boot

- the clock generic (register) code (clk/clk.c)

The plan was to allow others to port their subset of code when needed. In that way we only get the code which is really used and tested.

Quoted 1 line

i.MX8MM use composite heavily in Linux, so I have started.

Ok. I see. Your patches/review is more than welcome.

Quoted 67 lines

Thanks,
Peng.

Quoted 63 lines
Quoted 3 lines

To avoid conflict with
you work, if you have a public tree, that could be good.

No problem. Thanks for the interest.

Quoted 25 lines

Thanks,
Peng.

Quoted 20 lines
Quoted 20 lines

Regards,
Peng.

Quoted 14 lines
Quoted 3 lines

Jagan.

Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH, Managing Director:

Wolfgang

Quoted 9 lines
Quoted 9 lines
Quoted 3 lines
Quoted 3 lines

Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax:
(+49)-8142-66989-80 Email: lukma at denx.de

Best regards,

Quoted 8 lines
Quoted 8 lines

Lukasz Majewski

--

DENX Software Engineering GmbH, Managing Director: Wolfgang
Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax:
(+49)-8142-66989-80 Email: lukma at denx.de

Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH, Managing Director: Wolfgang
Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email:
lukma at denx.de

Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de -------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190423/6c7dd406/attachment.sig>