Fix thunderx MTU with XDP
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v3 Latest2 patches 3 repliesIn review
- v22 patches 2 repliesSuperseded
Patches in v3 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/2 | net: thunderx: raise XDP MTU to 1508drivers/ | +11 | 1 reply | |
| 2/2 | net: thunderx: don't allow jumbo frames with XDPdrivers/ | +9 | 1 reply |
Reviews trailers per patch
All 2 patches have a Reviewed-by or Acked-by.
| Patch | Jesper Dangaard Brouer |
|---|---|
| 1/2 | A-b |
| 2/2 | A-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH v3 0/2] Fix thunderx MTU with XDP
The thunderx driver can't use XDP with all MTU values.
This patches sets the right MTU values, and add a check to avoid setting a wrong value which will not function.
v3: Fix a copy-paste from two functions, tested on proper hardware:
# ip link show dev enP2p1s0v0
2: enP2p1s0v0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 1c:1b:0d:0d:52:a4 brd ff:ff:ff:ff:ff:ff
# ip link set enP2p1s0v0 mtu 1800
# ip link set dev enP2p1s0v0 xdpdrv object mtu.o
[ 787.019730] nicvf 0002:01:00.1 enP2p1s0v0: Jumbo frames not yet supported with XDP, current MTU 1800.
RTNETLINK answers: Operation not supported
# ip link set enP2p1s0v0 mtu 1500
# ip link set dev enP2p1s0v0 xdpdrv object mtu.o
[ 800.574568] nicvf 0002:01:00.1 enP2p1s0v0: Link is Up 10000 Mbps Full duplex
# ip link set enP2p1s0v0 mtu 1600
[ 807.248321] nicvf 0002:01:00.1 enP2p1s0v0: Jumbo frames not yet supported with XDP, current MTU 1500.
RTNETLINK answers: Invalid argumentMatteo Croce (2):
net: thunderx: raise XDP MTU to 1508
net: thunderx: don't allow jumbo frames with XDP
.../net/ethernet/cavium/thunder/nicvf_main.c | 22 +++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-)
Signature · 1 line
2.21.0