i.MX8MM + CCF
Get series with b4
b4 am 20190506233208.4a92dc7b@jawaVersions newest first
- v1 Latest23 of 41 patches 0 repliesNew
23 of 41 patches are in this archive. The cover letter announces 41.
Patches in v1 No applies recorded yet
Reviews trailers per patch
5 of 23 patches have a Reviewed-by or Acked-by.
| Patch | Lukasz Majewski | Bin Meng |
|---|---|---|
| 1/41 | ||
| 2/41 | ||
| 3/41 | ||
| 3/41 | ||
| 3/41 | ||
| 4/41 | ||
| 4/41 | ||
| 5/41 | R-b | |
| 6/41 | R-b | |
| 7/41 | ||
| 8/41 | ||
| 8/41 | ||
| 10/41 | ||
| 11/41 | ||
| 11/41 | ||
| 11/41 | ||
| 11/41 | ||
| 11/41 | ||
| 11/41 | ||
| 12/41 | R-b | |
| 12/41 | R-b | |
| 12/41 | R-b | |
| 13/41 |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [U-Boot] [i.MX8MM+CCF 00/41] i.MX8MM + CCF
Hi Peng,
Quoted 10 lines
This patch set is based Lukasz V3 CCF patchset,
[PATCH v3 00/11] clk: Port Linux common clock framework [CCF] to U-boot (tag: 5.0-rc3)
https://github.com/lmajewski/u-boot-dfu/commits/CCF-v3Added a few fixes to Lukasz's v3 patchset.
Introduced clk-gate/composite
Added set rate support
Per my understanding, U-Boot CCF will not support mux reparent, and support rate prograte setting to parent automatically.
I think that we shall keep the code as small as possible and hence add only necessary features (that is why my code only supports gating and muxing for 'downstream' settings).
Quoted 5 lines
So new clk
feature added follow this rule.There are many warnings when importing linux ccf code, I did not modify them all.
I've removed some not needed arguments (like spinlocks) when porting the code.
Quoted 3 lines
The rest patches are for i.MX8MM, part of legacy clk code are still kept, because we are hard to enable CCF at very early stage,
Yes, CCF in SPL is a challenging task.
Quoted 3 lines
we set
malloc space to DRAM when dram initialized in spl stage, so we have limited SRAM for uclass dm and dm clk,
I'm puzzled about this sentence. The malloc is set to be in DRAM, but also SRAM is used for uclass dm and CCF.
As fair as I remember on iMX6Q it is possible to setup early malloc to be in SRAM (OCRAM). Having it in DRAM is a bit late, IMHO as clocks are already setup in this moment.
Quoted 2 lines
so keep the DRAM PLL related
setting with legacy clk code which use small ram.
What is the 'ram' ? I suppose that the legacy clk code uses OCRAM to allocate variables ?
Quoted 3 lines
The u-boot-spl.bin now is about 100KB without ddr firmware,usb stack and hab, so really large......
I think that 100KiB is too much (without DDR, USB stack and HAB). For one IMX6Q setup (before DM/DTS conversion) I had SPL size ~30 KiB.
After the conversion it is 55 KiB ...
Quoted 2 lines
I am thinking what we could do to shrink the size, welcome any suggestions.
Please consider using:
- TINY_PRINTF
- TINY_FIT support (just support for single image in FIT)
- OF_PLATDATA (the in-device-tree code is compiled in as C structures) - no need to include DTS parsing / handling code in SPL. Also the *.dts file is not needed.
Drawback is that you need to extend drivers to support OF_PLATDATA (RK3399 have some examples of such approach).
- Check if thumb2 is uses for SPL compilation
- I simply do find *.o files and sort them regarding the size. Then I do know where to start with optimisations.
Quoted 124 lines
Not expect this patchset could be merged, because of the CCF/clock code change, but since the clock part blocks i.MX8MM upstream, just would like to speed up the development with community and move on.
Peng Fan (40):
clk: correct getclk_xpointer
clk: fixed-factor: fix getclk_fixed_factor
clk: introduceclk_dev_binded
clk: useclk_dev_binded
clk-provider: sync more clk flags from Linux Kernel
cmd: clk: print err value whenclk_get_ratefailed
clk: mux: add set parent support
clk: export mux/divider ops
clk: add clk-gate support
divider set rate supporrt
clk:fixed_rate: exportclk_fixed_rate
clk:fixed_rate: add pre reloc flag
clk: imx: import clk heplers
clk: imx: gate2 add set rate
linux: compat: guardPAGE_SIZE
drivers: core: use strcmp when find device by name
ddr: imx8m: fix ddr firmware location when enable SPL OF
imx: add IMX8MQ kconfig entry
imx: add IMX8MM kconfig entry
imx: imx8mm: add clock bindings header
imx: add i.MX8MM cpu type
imx: spl: addspl_board_boot_devicefor i.MX8MM
imx8m: update imx-regs for i.MX8MM
imx: addget_cpu_revsupport for i.MX8MM
imx8m: rename clock toclock_imx8mq
imx8m: restructureclock.h
imx8m: add clk support for i.MX8MM
imx8m: soc: probe clk before relocation
imx8m: add pin header for i.MX8MM
imx: add i.MX8MM PE property
imx8m: Fix MMU table issue for OPTEE memory
imx8m: set BYPASS ID SWAP to avoid AXI bus errors
imx8m: soc: enable SCTR clock before timer init
serial:Kconfig: makeMXC_UARTusable for MX7 and IMX8M
clk: imx: addKconfigentry for i.MX8MM
clk: imx: add pll14xx driver
clk: add composite clk support
clk: imx: add i.MX8MM composite clk support
clk: imx: add i.MX8MM clk driver
imx: add i.MX8MM EVK board supportYe Li (1):
imx8m: Configure trustzone region 0 for non-secure accessarch/arm/dts/Makefile | 3 +- arch/arm/dts/imx8mm-evk-u-boot.dtsi | 92 + arch/arm/dts/imx8mm-evk.dts | 235 +++ arch/arm/dts/imx8mm-pinfunc.h | 629 +++++++ arch/arm/dts/imx8mm.dtsi | 733 ++++++++ arch/arm/include/asm/arch-imx/cpu.h | 6 + arch/arm/include/asm/arch-imx8m/clock.h | 493 +---- arch/arm/include/asm/arch-imx8m/clock_imx8mm.h | 387 ++++ arch/arm/include/asm/arch-imx8m/clock_imx8mq.h | 424 +++++ arch/arm/include/asm/arch-imx8m/imx-regs.h | 75 +- arch/arm/include/asm/arch-imx8m/imx8mm_pins.h | 691 +++++++ arch/arm/include/asm/mach-imx/iomux-v3.h | 4 + arch/arm/include/asm/mach-imx/sys_proto.h | 8 + arch/arm/mach-imx/cpu.c | 12 + arch/arm/mach-imx/imx8m/Kconfig | 17 +- arch/arm/mach-imx/imx8m/Makefile | 4 +- arch/arm/mach-imx/imx8m/clock_imx8mm.c | 292 +++ .../arm/mach-imx/imx8m/{clock.c => clock_imx8mq.c} | 5 +- arch/arm/mach-imx/imx8m/clock_slice.c | 461 +++++ arch/arm/mach-imx/imx8m/soc.c | 112 +- arch/arm/mach-imx/spl.c | 8 + board/freescale/imx8mm_evk/Kconfig | 12 + board/freescale/imx8mm_evk/MAINTAINERS | 6 + board/freescale/imx8mm_evk/Makefile | 12 + board/freescale/imx8mm_evk/imx8mm_evk.c | 90 + board/freescale/imx8mm_evk/lpddr4_timing.c | 1980 ++++++++++++++++++++ board/freescale/imx8mm_evk/spl.c | 216 +++ cmd/clk.c | 2 + configs/imx8mm_evk_defconfig | 52 + drivers/clk/Kconfig | 14 + drivers/clk/Makefile | 3 +- drivers/clk/clk-composite.c | 165 ++ drivers/clk/clk-divider.c | 92 +- drivers/clk/clk-fixed-factor.c | 2 +- drivers/clk/clk-gate.c | 151 ++ drivers/clk/clk-mux.c | 76 +- drivers/clk/clk.c | 8 + drivers/clk/clk_fixed_rate.c | 9 +- drivers/clk/imx/Kconfig | 9 + drivers/clk/imx/Makefile | 1 + drivers/clk/imx/clk-composite-8m.c | 170 ++ drivers/clk/imx/clk-gate2.c | 15 +- drivers/clk/imx/clk-imx8mm.c | 415 ++++ drivers/clk/imx/clk-pfd.c | 2 +- drivers/clk/imx/clk-pll14xx.c | 377 ++++ drivers/clk/imx/clk-pllv3.c | 2 +- drivers/clk/imx/clk.h | 106 ++ drivers/core/uclass.c | 2 +- drivers/ddr/imx/imx8m/helper.c | 12 +- drivers/serial/Kconfig | 2 +- include/clk.h | 9 + include/configs/imx8mm_evk.h | 199 ++ include/dt-bindings/clock/imx8mm-clock.h | 244 +++ include/linux/clk-provider.h | 74 + include/linux/compat.h | 2 + 55 fileschanged, 8728 insertions(+), 494 deletions(-) create mode 100644
arch/arm/dts/imx8mm-evk-u-boot.dtsicreate mode 100644arch/arm/dts/imx8mm-evk.dtscreate mode 100644arch/arm/dts/imx8mm-pinfunc.hcreate mode 100644arch/arm/dts/imx8mm.dtsicreate mode 100644arch/arm/include/asm/arch-imx8m/clock_imx8mm.hcreate mode 100644arch/arm/include/asm/arch-imx8m/clock_imx8mq.hcreate mode 100644arch/arm/include/asm/arch-imx8m/imx8mm_pins.hcreate mode 100644arch/arm/mach-imx/imx8m/clock_imx8mm.crenamearch/arm/mach-imx/imx8m/{clock.c=>clock_imx8mq.c} (99%) create mode 100644 board/freescale/imx8mm_evk/Kconfig create mode 100644 board/freescale/imx8mm_evk/MAINTAINERS create mode 100644 board/freescale/imx8mm_evk/Makefile create mode 100644board/freescale/imx8mm_evk/imx8mm_evk.ccreate mode 100644board/freescale/imx8mm_evk/lpddr4_timing.ccreate mode 100644board/freescale/imx8mm_evk/spl.ccreate mode 100644 configs/imx8mm_evk_defconfig create mode 100644drivers/clk/clk-composite.ccreate mode 100644drivers/clk/clk-gate.c
Quoted 6 lines
create mode 100644 drivers/clk/imx/clk-composite-8m.c create mode 100644 drivers/clk/imx/clk-imx8mm.c create mode 100644 drivers/clk/imx/clk-pll14xx.c create mode 100644 include/configs/imx8mm_evk.h create mode 100644 include/dt-bindings/clock/imx8mm-clock.h
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de -------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190506/6668a266/attachment.sig>