Skip to content

arm64: dts: meson: g12a: add i2c

Jerome Brunet linux-amlogic linux-devicetree lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 1 replyIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3arm64: dts: meson: g12a: add i2c nodesarch/arm64/boot/dts/amlogic/meson-g12a.dtsi+268 -00 replies
2/3arm64: dts: meson: u200: enable i2c bussesarch/arm64/boot/dts/amlogic/meson-g12a-u200.dts+21 -00 replies
3/3arm64: dts: meson: sei510: enable i2c3arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts+6 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/3] arm64: dts: meson: g12a: add i2c

Add the i2c controllers and pinctrl definitions to the g12a DT then the busses present on the u200 and sei510.

Notice the use of the pinconf DT property 'drive-strength-microamp'. Support for this property is not yet merged in meson pinctrl driver but the DT part as been acked by the DT maintainer [0] so it should be safe to use.

[0]: https://lkml.kernel.org/r/20190513152451.GA25690@bogus

Guillaume La Roque (1):
arm64: dts: meson: g12a: add i2c nodes

Jerome Brunet (2):
arm64: dts: meson: u200: enable i2c busses
arm64: dts: meson: sei510: enable i2c3

 .../boot/dts/amlogic/meson-g12a-sei510.dts    |   6 +
 .../boot/dts/amlogic/meson-g12a-u200.dts      |  21 ++
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi   | 268 ++++++++++++++++++
 3 files changed, 295 insertions(+)
Signature · 1 line
2.20.1