Skip to content

RFC TurboSched: A scheduler for sustaining Turbo Frequencies for longer durations

Parth Shah linux-pm lkml oe-kbuild-all 5 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v6 RFC Latest5 patches 2 repliesIn review
  2. v5 RFC6 patches 12 repliesSuperseded
  3. v4 RFC8 patches 4 repliesSuperseded
Earlier versions · 2
VersionPostedPatchesRepliesStatus
v3 RFC8 patches2 repliesSuperseded
v2 RFC6 patches11 repliesSuperseded

Changes in v6 from the cover letter

- Addressed comments from Vincent Guittot and Hillf Danton
- Re based the series on the top of latency_nice patch series defined at
https://lkml.org/lkml/2020/1/16/319. This allows [1] to use the latency_nice framework for small background tasks classification from the userspace.
ToDo:
- Add Documentation for TurboSched including possible regression as per the comment from Pavel Machek

Patches in v6 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5sched: Introduce switch to enable TurboSched for task packingkernel/sched/core.c kernel/sched/sched.h+37 -02 replies
2/5sched/core: Update turbo_sched count only when requiredkernel/sched/core.c kernel/sched/sched.h+12 -00 replies
3/5sched/fair: Tune task wake-up logic to pack small background tasks on fewer coreskernel/sched/core.c kernel/sched/fair.c+89 -10 replies
4/5sched/fair: Provide arch hook to find domain for non idle core search scankernel/sched/fair.c+8 -00 replies
5/5powerpc: Set turbo domain to NUMA node for task packingarch/powerpc/include/asm/topology.h arch/powerpc/kernel/smp.c+10 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v6 yet.

Read the v6 thread

Cover letter [RFC v6 0/5] TurboSched: A scheduler for sustaining Turbo Frequencies for longer durations

This is the 5th version of the patch series to sustain Turbo frequencies for longer durations.

The previous versions can be found here:
v5: https://lkml.org/lkml/2019/10/7/118
v4: https://lkml.org/lkml/2019/7/25/296
v3: https://lkml.org/lkml/2019/6/25/25
v2: https://lkml.org/lkml/2019/5/15/1258
v1: https://lwn.net/Articles/783959/

The changes in this versions are:
v5 -> v6:
- Addressed comments from Vincent Guittot and Hillf Danton
- Re based the series on the top of latency_nice patch series defined at
https://lkml.org/lkml/2020/1/16/319. This allows [1] to use the latency_nice framework for small background tasks classification from the userspace.
ToDo:
- Add Documentation for TurboSched including possible regression as per the comment from Pavel Machek

v4 -> v5:
- Remove Core capacity calculation for finding non-idle core
- Use idle_cpu() and cpu_overutilized() to find the core for task packing
- This changes functionality a bit. Updated new results for POWER9 system
- Re-named ambiguous naming "jitter" to "small background" tasks

v3 -> v4:
- Based on Patrick Bellasi's comments, removed the use of UCLAMP based mechanism to classify tasks as jitter
- Added support to sched_setattr to mark the task as jitter by adding a new flag to the existing task_struct->flags attribute. This is decided to not have any new variable inside task_struct and thus get rid of size bloating.
- No functional changes

v2 -> v3:
- Added a new attribute in task_struct to allow per task jitter classification so that scheduler can use this as request to change wakeup path for task packing
- Use syscall for jitter classification, removed cgroup based task classification
- Use mutex over spinlock to get rid of task sleeping problem
- Changed _Bool->int everywhere
- Split few patches to have arch specific code separate from core scheduler code

v1 -> v2:
- No CPU bound tasks' classification, only jitter tasks are classified from the cpu cgroup controller
- Use of Spinlock rather than mutex to count number of jitters in the system classified from cgroup
- Architecture specific implementation of Core capacity multiplication factor changes dynamically based on the number of active threads in the core
- Selection of non idle core in the system is bounded by DIE domain
- Use of UCLAMP mechanism to classify jitter tasks
- Removed "highutil_cpu_mask", and rather uses sd for DIE domain to find better fit

Abstract
========

The modern servers allows multiple cores to run at range of frequencies higher than rated range of frequencies. But the power budget of the system inhibits sustaining these higher frequencies for longer durations.

However when certain cores are put to idle states, the power can be effectively channelled to other busy cores, allowing them to sustain the higher frequency.

One way to achieve this is to pack tasks onto fewer cores keeping others idle, but it may lead to performance penalty for such tasks and sustaining higher frequencies proves to be of no benefit. But if one can identify unimportant low utilization tasks which can be packed on the already active cores then waking up of new cores can be avoided. Such tasks are short and/or bursty "background tasks" and waking up new core is expensive for such case.

Current CFS algorithm in kernel scheduler is performance oriented and hence tries to assign any idle CPU first for the waking up of new tasks. This policy is perfect for major categories of the workload, but for background tasks, one can save energy by packing them onto the active cores and allow those cores to run at higher frequencies.

These patch-set tunes the task wake up logic in scheduler to pack exclusively classified background tasks onto busy cores. The work involves the such tasks classifications by using syscall based mechanisms.

In brief, if we can pack such small background tasks on busy cores then we can save power by keeping other cores idle and allow busier cores to run at turbo frequencies, patch-set tries to meet this solution in simplest manner by only packing tasks with latency_nice==19 and util <= 12.5%.

Implementation
==============

These patches uses latency_nice [3] syscall based mechanism to classify the tasks as small background noises. The task wakeup logic uses this information to pack such tasks onto cores which are already running busy with CPU intensive tasks. The task packing is done at select_task_rq_fair only so that in case of wrong decision load balancer may pull the classified background tasks for maximizing performance.

We define a core to be non-idle if any CPU has >12.5% utilization and not more than 1 CPU is overutilized (>80% utilization); the background tasks are packed over these cores using First-fit approach.

The value 12.5% utilization indicates the CPU is sufficiently busy to not go to deeper IDLE-states (target_residency >= 10ms) and tasks can be packed here.

To demonstrate/benchmark, patches uses turbo_bench, a synthetic workload generator [2].

Following snippet demonstrates the use of TurboSched feature:

```
i=8; ./turbo_bench -t 30 -h $i -n $((i*2)) -j
```

This spawns 2*i total threads: of which i-CPU bound and i-low util threads.

Current implementation uses only small background classified tasks to be packed on the first busy cores, but can be further optimized by getting userspace input of important tasks and keeping track of such tasks. This leads to optimized searching of non idle cores and also more accurate as userspace hints are safer than auto classified busy cores/tasks.

Result
======

The patch-set proves to be useful for the system and the workload where frequency boost is found to be useful than packing tasks into cores. IBM POWER 9 system shows the frequency benefit can be up to 18% which can be translated to the maximum workload benefit up to 14%.

(higher is better)

Frequency benefit of TurboSched w.r.t. CFS

   +-+-+-+-+--+-+-+-+-+-+-+-+--+-+-+-+-+-+-+-+--+-+-+-+-+-+-+-+--+-+-+-+-+
20 +-+ + + +  + + + + + + + +  + + + + + + + +  + + + + + + + +  + + + +-+
   |                    **                Frequency benefit in %         |
   |                    **                                               |
15 +-+                  **                                             +-+
   |              ****  **  **                                           |
   |            * ****  ******                                           |
10 +-+          * ****  ******                                         +-+
   |            * ****  ******                                           |
   |          * * ************   *                                       |
 5 +-+        * * ************ * *   **                                +-+
   |       ** * * ************ * *   ****                                |
 0 +-******** * * ************ * * ************ * * * ********** * * * **+
   |   **                                                                |
   |                                                                     |
-5 +-+                                                                 +-+
   | + + + +  + + + + + + + +  + + + + + + + +  + + + + + + + +  + + + + |
   +-+-+-+-+--+-+-+-+-+-+-+-+--+-+-+-+-+-+-+-+--+-+-+-+-+-+-+-+--+-+-+-+-+
     0 1 2 3  4 5 6 7 8 91011 1213141516171819 2021222324252627 28293031  
                           No. of workload threads                        

Performance benefit of TurboSched w.r.t. CFS
20 +-+-+-+-+--+-+-+-+-+-+-+-+--+-+-+-+-+-+-+-+--+-+-+-+-+-+-+-+--+-+-+-+-+

   | + + + +  + + + + + + + +  + + + + + + + +  + + + + + + + +  + + + + |
   |                                    Performance benefit in %         |
15 +-+                  **                                             +-+
   |                    **                                               |
   |                    ******                                           |
10 +-+                  ******                                         +-+
   |                **********                                           |
   |              ************                                           |
 5 +-+            ************   *     **                              +-+
   |              ************   *   ****                                |
   |            * ************ * *   ******  **                          |
 0 +-******** * * ************ * * ************ * * * ********** * * * **+
   |                                       **             **     *       |
   |                                                                     |
-5 +-+                                                                 +-+
   | + + + +  + + + + + + + +  + + + + + + + +  + + + + + + + +  + + + + |
   +-+-+-+-+--+-+-+-+-+-+-+-+--+-+-+-+-+-+-+-+--+-+-+-+-+-+-+-+--+-+-+-+-+
     0 1 2 3  4 5 6 7 8 91011 1213141516171819 2021222324252627 28293031  
                           No. of workload threads                        

These numbers are w.r.t. turbo_bench.c multi-threaded test benchmark which can create two kinds of tasks: CPU bound (High Utilization) and Background (Low Utilization). N in X-axis represents N-CPU bound and N-background tasks spawned. The performance (Operations per Seconds) graph indicates the benefit with TurboSched can be upto 14% compared to the CFS task placement strategy for such background classified tasks.

Series organization
==============
- Patches 1-2: Small background tasks classification using syscall
- Patch 3 : Tune CFS task wakeup logic to pack tasks onto busy cores
- Patches 4-5: Change non-idle core search domain to LLC by default and provide arch hooks to change to NUMA for powerpc.

Series can be applied on top of latency_nice attribute introduction patches [3].

References
==========
[1]. Usecases for the per-task latency-nice attribute,

     https://lkml.org/lkml/2019/9/30/215
[2]. Test Benchmark: turbobench,
     https://github.com/parthsl/tools/blob/master/benchmarks/turbo_bench.c
[3]. Introduce per-task latency_nice for scheduler hints,
     https://lkml.org/lkml/2020/1/16/319

Parth Shah (5):
sched: Introduce switch to enable TurboSched for task packing sched/core: Update turbo_sched count only when required sched/fair: Tune task wake-up logic to pack small background tasks on
fewer cores
sched/fair: Provide arch hook to find domain for non idle core search
scan
powerpc: Set turbo domain to NUMA node for task packing

 arch/powerpc/include/asm/topology.h |  3 +
 arch/powerpc/kernel/smp.c           |  7 +++
 kernel/sched/core.c                 | 37 +++++++++++
 kernel/sched/fair.c                 | 95 ++++++++++++++++++++++++++++-
 kernel/sched/sched.h                | 15 +++++
 5 files changed, 156 insertions(+), 1 deletion(-)
Signature · 1 line
2.17.2