Skip to content

imx: dm: Update mccmon6 board to only use DM/DTS in U-Boot proper

Lukasz Majewski u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest5 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5ARM: imx: Covnert mccmon6 to use DM/DTS in the u-boot properarch/arm/dts/Makefile arch/arm/dts/imx6q-mccmon6.dts arch/arm/mach-imx/mx6/Kconfig +4 more+444 -1800 replies
2/5ARM: imx: Decouple mccmon6's SPL and u-boot proper codeboard/liebherr/mccmon6/Makefile board/liebherr/mccmon6/mccmon6.c board/liebherr/mccmon6/spl.c+276 -2900 replies
3/5spl: nor: Provide falcon boot support for NOR memoriescommon/spl/spl_nor.c+5 -00 replies
4/5ARM: imx: Convert mccmon6 to use fitImage instead of uImage+DTBboard/liebherr/mccmon6/spl.c configs/mccmon6_nor_defconfig configs/mccmon6_sd_defconfig +1 more+42 -360 replies
5/5mccmon6: defconfig: nor: Enable usage of *_TINY_* drivers in SPLconfigs/mccmon6_nor_defconfig+3 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH v1 0/5] imx: dm: Update mccmon6 board to only use DM/DTS in U-Boot proper

This patch series converts mccmon6 to use Driver Model and Device Tree in U-Boot proper.

As the SPL is size constrained (and most notably the device has a strict boot time requirements) for this board (and uses falcon boot)
- its conversion to DM/DTB will be added with separate patch series.

The SPL/U-Boot proper now uses fitImage instead of legacy uImage and DTB.

Some notable changes:
- Use fitImage to boot Linux kernel (and also use of SPL's Falcon mode when running from parallel NOR flash)
- DTS sync with kernel (tag: v4.20)
- Decoupling SPL and U-Boot proper for easy future SPL DM/DTS conversion
- Conversion to DM_MMC, DM_SPI, and BLK (U-Boot proper)

Dependencies (on top of 2019.07-rc2):
"imx: Cleanup i.MX6Q mccmon6 boardconfiguration"
http://patchwork.ozlabs.org/cover/1100398/

then:
http://patchwork.ozlabs.org/patch/1100580/
http://patchwork.ozlabs.org/patch/1100582/
http://patchwork.ozlabs.org/patch/1100584/
http://patchwork.ozlabs.org/patch/1100583/

On top of above patches this series shall be applied.

Lukasz Majewski (5):
ARM: imx: Covnert mccmon6 to use DM/DTS in the u-boot proper
ARM: imx: Decouple mccmon6's SPL and u-boot proper code
spl: nor: Provide falcon boot support for NOR memories
ARM: imx: Convert mccmon6 to use fitImage instead of uImage+DTB
mccmon6: defconfig: nor: Enable usage of *_TINY_* drivers in SPL

 arch/arm/dts/Makefile            |   1 +
 arch/arm/dts/imx6q-mccmon6.dts   | 382 +++++++++++++++++++++++++++++++++
 arch/arm/mach-imx/mx6/Kconfig    |   7 +
 board/liebherr/mccmon6/Makefile  |   7 +-
 board/liebherr/mccmon6/mccmon6.c | 446 ---------------------------------------
 board/liebherr/mccmon6/spl.c     | 279 +++++++++++++++++++++++-
 common/spl/spl_nor.c             |   5 +
 configs/mccmon6_nor_defconfig    |  42 +++-
 configs/mccmon6_sd_defconfig     |  35 ++-
 include/configs/mccmon6.h        |  70 ++----
 10 files changed, 769 insertions(+), 505 deletions(-)
 create mode 100644 arch/arm/dts/imx6q-mccmon6.dts
Signature · 1 line
2.11.0