Skip to content

Reset timeout for paused hardware

Keith Busch linux-block linux-nvme 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 12 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2blk-mq: provide way to reset rq deadlineblock/blk-mq.c include/linux/blk-mq.h+31 -00 replies
2/2nvme: reset request timeouts during fw activationdrivers/nvme/host/core.c+20 -03 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] Reset timeout for paused hardware

Hardware may temporarily stop processing commands that have been dispatched to it while activating new firmware. Some target implementation's paused state time exceeds the default request expiry, so any request dispatched before the driver could quiesce for the hardware's paused state will time out, and handling this may interrupt the firmware activation.

This two-part series provides a way for drivers to reset dispatched requests' timeout deadline, then uses this new mechanism from the nvme driver's fw activation work.

Keith Busch (2):
blk-mq: provide way to reset rq timeouts
nvme: reset request timeouts during fw activation

 block/blk-mq.c           | 30 ++++++++++++++++++++++++++++++
 drivers/nvme/host/core.c | 20 ++++++++++++++++++++
 include/linux/blk-mq.h   |  1 +
 3 files changed, 51 insertions(+)
Signature · 1 line
2.14.4