Skip to content

sunxi: env: Load environment from boot media

Tom Rini u-boot 1 version New

Get series with b4
b4 am 20190611142819.GE7115@bill-the-cat

Versions newest first

  1. v1 Latest3 of 5 patches 0 repliesNew

3 of 5 patches are in this archive. The cover letter announces 5.

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5env: allow undefined CONFIG_SYS_MMC_ENV_DEV+0 -01 reply
1/5env: allow undefined CONFIG_SYS_MMC_ENV_DEV+0 -00 replies
3/5env: allow runtime determination of FAT environment partition+0 -00 replies

Reviews trailers per patch

1 of 3 patches has a Reviewed-by or Acked-by.

PatchTom Rini
1/5
1/5
3/5R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/5] sunxi: env: Load environment from boot media
Quoted 42 lines · Maxime Ripard
Quoted 27 lines · Andre Przywara

On Mon, 10 Jun 2019 10:30:37 +0200
Maxime Ripard <[email protected]> wrote:

Hi Maxime,

thanks for having a look!

Quoted 10 lines · Andre Przywara
Quoted 8 lines

At the moment we need to configure the place where U-Boot tries to load its environment from at compile time. This is not only inflexible, but also unnecessary, as we have easy access to the boot source.

This series prepares U-Boot on Allwinner boards to load the environment from the same media where the SPL and U-Boot proper were loaded from. This allows to keep one firmware binary, and copy it to an SD card, eMMC or even SPI flash, without needing to configure it differently.

Quoted 7 lines

This does change a couple of things though. The environment used to be loaded always from the same source, no matter the boot device. This means that if you would set an SD card, you would get the environment from the eMMC. Same thing for FEL. This is no longer the case.

I don't know whether it's a good or a bad thing, but it should be mentionned.

This is true, I failed to mention that.

Quoted 8 lines

To start a discussion on this:
I consider the current (fixed location) behaviour somewhat surprising and limiting, and couldn't find a real use case where this would be required. Happy to hear of one!
Instead I thought about those cases:
- There is some botched U-Boot plus environment on the eMMC. You want to boot from SD card to have a clean start, possibly to fix it. But it will load the possibly outdated, broken or even unrelated environment from eMMC.

This one might be a feature though. Being able to restore / fix an environment in the eMMC running from an SD card has save me a couple of times. Or booting from the SD card because the U-Boot on the eMMC is broken, while the environment is working.

Quoted 8 lines
Quoted 2 lines

- You want to boot from SD card without touching the eMMC at all. Saving the environment will spoil that.

But it goes against that one, which might be more important / sensible.

Quoted 1 line

- You want to have one image for all possible boot media.

That won't happen, only because NAND is a thing.

Some of this is perhaps an argument for adding a sub-command to specify where the environment is to be read from. Heuristics are still only a best guess and won't get it right every time.

Quoted 3 lines

And even then, I'm not really sure that it's a good thing. A U-Boot build these days is roughly in the same sizes than a stripped down Linux image. For an inferior solution in pretty much every aspect.

Hey now. We aren't _quite_ that large. And we are (really!) trying to find a happy medium between "distros want X/Y/Z for everyone" and "can we commonly get back to UNDER 512kB maybe? Please?".

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190611/37732981/attachment.sig>