Skip to content

arm64: dts: add basic DTS for imx8qm-rom7720 board

Oliver Graute linux-arm-kernel linux-devicetree lkml 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v2 Latest2 patches 0 repliesNew

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2arm64: add gpio4 and gpio5 to basic DTS for i.MX8MQarch/arm64/boot/dts/freescale/imx8qm.dtsi+19 -00 replies
2/2arm64: dts: add basic DTS for imx8qm-rom7720-a1 boardarch/arm64/boot/dts/freescale/Makefile arch/arm64/boot/dts/freescale/imx8qm-rom7720-a1.dts+222 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCHv2 0/2] arm64: dts: add basic DTS for imx8qm-rom7720 board

This patchset is ontop of Aisheng Dongs clock driver changes for the imx8qm

https://patchwork.kernel.org/cover/10824537/

This patchset is based on next-20190222

I need information about the status of the integration of the imx8qm clock driver into mainline. Is this ongoing?

I need some hints why the imx8qm-rom7720 do NOT boot with the following changes. It stops at "Starting kernel ..."

Oliver Graute (2):
arm64: add gpio4 and gpio5 to basic DTS for i.MX8MQ
arm64: dts: add basic DTS for imx8qm-rom7720-a1 board

 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../boot/dts/freescale/imx8qm-rom7720-a1.dts  | 221 ++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8qm.dtsi     |  19 ++
 3 files changed, 241 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-rom7720-a1.dts
Signature · 1 line
2.17.1