Skip to content

qcow2: add zstd cluster compression

Denis Plotnikov qemu-devel 7 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v6 Latest posting 2/20 of 3 patches 2 repliesIn review
  2. v6 posting 1/23 patches 2 repliesSuperseded
  3. v53 patches 8 repliesSuperseded
Earlier versions · 4
VersionPostedPatchesRepliesStatus
v43 patches4 repliesSuperseded
v33 patches5 repliesSuperseded
v23 patches15 repliesSuperseded
v13 patches10 repliesSuperseded

Patches in v6 posting 2/2 No applies recorded yet

None of the 3 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v6 yet.

Read the v6 thread

Cover letter [Qemu-devel] [Ping] [PATCH v6 0/3] qcow2: add zstd cluster compression
Quoted 97 lines · Denis Plotnikov

ping!

Quoted 94 lines · Denis Plotnikov

v6:
* fixed zstd compressed length storing/loading [Eric]
* fixed wording, spec section placement [Eric]

v5:
* type changed for compression_type at BDRVQcow2State [Kevin]
* fixed typos, grammar [Kevin]
* fixed default config zstd setting [Kevin]

v4:
* remove not feasible switch case [Vladimir]
* add sanity checks to zstd decompresssion [Vladimir]
* store zstd compressed length in big endian [Max, Kevin]

v3:
* relax the compression type setting requirement when
the compression type is not zlib [Eric, Kevin]
* add compression type values to the spec [Eric]
* fix wording in the spec and descriptions [Eric]
* fix functions descriptions [Max]
* fix zstd (de)compression functions flaws [Max]
* fix zstd related parts of configure file [Max]
* rebased to v4.1.0-rc5 and chenged the series version aiming to 4.2

v2:
* relax the compression type setting restriction in the spec
* fix qcow2 header size checking
* fix error processing and messaging
* fix qcow2 image specific info reporting
* set Qcow2CompressionType zstd config dependant
* add zstd compressed cluster format description to the spec

v1:
* extend qcow2 header instead of adding a new incompatible extension header specification re-written accordingly
* enable zstd compression via config
* fix zstd (de)compression functions
* fix comments/description
* fix function naming

---
The goal of the patch-set is to enable qcow2 to use zstd compression for clusters. ZSTD provides better (de)compression performance than currently used ZLIB. Using it will improve perforamnce (reduce compression time) when the compressed clusters is used, e.g backup scenarios.

Also, the patch-set extends qcow2 specification by adding compression_type feature. The feature enables adding ZSTD and another compression algorithms in the future.

Here is some measurements ZSTD vs ZLIB:

The test:
Test compresses and decompresses qemu qcow2 image with just installed rhel-7.6 guest.
Image cluster size: 64K. Image on disk size: 2.2G

The test was conducted with brd disk to reduce the influence of disk subsystem to the test results.
The results is given in seconds.

compress cmd:
time ./qemu-img convert -O qcow2 -c -o compression_type=[zlib|zstd] src.img [zlib|zstd]_compressed.img
decompress cmd
time ./qemu-img convert -O qcow2 [zlib|zstd]_compressed.img uncompressed.img

The results:
compression decompression
zlib zstd zlib zstd
------------------------------------------------------------
real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %)
user 65.0 15.8 5.3 2.5
sys 3.3 0.2 2.0 2.0

Both ZLIB and ZSTD gave the same compression ratio: ~1.5 compressed image size in both cases: ~1.4G

Denis Plotnikov (3):
qcow2: introduce compression type feature
qcow2: rework the cluster compression routine
qcow2: add zstd cluster compression

   block/qcow2-threads.c     | 199 +++++++++++++++++++++++++++++++++++---
   block/qcow2.c             |  98 +++++++++++++++++++
   block/qcow2.h             |  26 +++--
   configure                 |  29 ++++++
   docs/interop/qcow2.txt    |  35 ++++++-
   include/block/block_int.h |   1 +
   qapi/block-core.json      |  23 ++++-
   7 files changed, 387 insertions(+), 24 deletions(-)